Fostex LR16 manual Copying a stereo mix file to an external medium, Press any operation key

Page 70

Model LR16 [Recorder functions / Project management]

(4)Use the [MENU] dial to highlight "[EXECUTE]" and press the [ENTER] key.

<Note>: If the data of a project with the same name exists on the USB memory stick when you attempt to execute ex- porting the project data by pressing the [ENTER] key, the following popup ap- pears.

To overwrite the existing data, press the [ENTER] key. If you do not want to over- write the existing data, press the [EXIT/ NO] key to cancel exporting data.

You can export data without overwrit- ing the existing data after changing the project name.

Copying a stereo mix file to an external medium

You can copy a stereo mix file in the "2 mix" folder of the current project to an external USB memory stick. You can copy all or any desired stereo mix files.

<Note>: Connect a FAT16- or FAT32-format- ted USB memory stick to the [USB HOST] port of the main unit before executing the follow- ing procedure.

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

 

GROUP (+4dBu)

EFF SEND (-2dBu)

AUX SEND (-2dBu)

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

INSERT

R

STEREO OUT (+4dBu)

L

ST MIX OUT (-10dBV)

USB

MIDI OUT

FOOT SW

CONTROLLER

PANEL LOCK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHANTOM

POWER

 

 

 

USB memory stick

The LR16 starts exporting data to the USB memory stick and the display shows the progress.

The display also shows the approximate fin- ish time and remaining size of the USB memory stick.

After completing exporting data, the follow- ing popup appears.

<Note>: If no USB memory stick is connected, or if a USB memory stick is not FAT16- or FAT32-formatted, or if no stereo mix file ex- ists, the appropriate popup as below is shown and the LR16 cannot enter the Export mode.

<When no USB memory stick is set>

<When a USB memory stick is not FAT16- or

FAT32-formatted>

<When no stereo mix file exists>

(5)Press any operation key.

The LR16 exit the MENU mode and the display returns to the Home screen.

(1)Press the [ENTER] key to bring up the MENU screen.

When you bring up the MENU screen for the first time, "Mark point" is highlighted.

(2)Use the [MENU] dial to highlight "Project" and press the [ENTER] key.

The display now shows the project menu.

70

Image 70
Contents Model LR16 Safety Instructions Important Safety Instructions Table of contents Signal flow of the mixer Connecting sources Adjusting the input level Low-cut filter Limiter EqualizerRecorder functions Recording/Playback Performing memory play Setting on the memory play setup screenAdding a mark Adding a mark on-the-fly Recorder functions File transfer to/from a computer SpecificationsRecorder functions Other functions Precautions on installation About power supplyIntroduction Condensation About version upgradeCleaning the exterior About copyrightsMain features OverviewRecorder section main unit features Before using the unit Unpacking the cartonIntegrating the main unit and control unit Setting the main unit and control unit separatelyUsage examples of LR16 Mounting the main unit and control unit on the rackIntegrating the control unit and main unit Necessary itemsRack mount adaptor After attaching the adaptor Turning on the power Connecting the power cordPreparation of power supply Connection to external devices Connection example live recordingConnection example home recording MTRBalanced and unbalanced inputs/outputs BalancedNames and functions Control unit input channel 1 through 14 ST/1-2/3-4 assign switches POST/PRE switchMute switch Solo switchSUB in jacks and control Control unit Master channelMonitor section Internal effects section Phantom 1-8, 9-16 indicatorsRecorder control section Assign to Stereo OUT switches AUX Send controls / Solo switches24 27 EFF Send control / Solo switch Output Limiter switchControl unit rear panel Main unit front panelST MIX key NEW Project keyTransport keys REC Track Select 1-16 keysMain unit rear panel Home screen Display detailsMenu mode screen Memory play setup mode screenModel LR16 Names and functions Mixer functions Signal flow of the mixer Mixer basicsConnecting sources to the input connectors Connecting sourcesAdjusting the input level Phantom power supply settingLow-cut filter Gain adjustment while monitoringEqualizer LimiterPre-fader Using an external effect processorUsing AUX 1, 2 Post-faderUsing Insert Using the internal effects processorApplying the internal effects Monitoring About the effect typesChannel grouping Solo monitorUsing SUB Set the Source switches on channels 15 and 16 to TRKBlock diagram Recorder functions Recording format Recording/playbackRecorder basics Recording mode ProjectLive recording BassRecording to tracks 1 through Adjusting input level =recording level of each mixer channel PreparationAdjusting the channel output levels sent to the stereo buss RecordingLocate to the beginning of the project Playing back a projectPress the Play key in the recorder or mixer section Overdubbing Connecting a sound sourceAdjusting the input level while playing back tracks 1 Multitrack recordingMixdown Performing overdubAdjusting level and sound of each track Starting mixdown recordingPunch in/out using the transport control keys Punch in/outPunch in/out using a footswitch At the punch out point, press only the Play keyModel LR16 Recorder functions / Recording/playback Memory play Section of the main unit Memory Setup key in the recorderPress the Enter key Numeric key number 0 through 9After you complete assignment,press EXIT/NO key Selecting the memory play modeSelecting a channel pair for memory play Performing memory play Press an illuminated numeric keyAdding a mark on-the-fly Mark functionAdding a mark Adding a mark via the mark list screenEditing a mark label Locating to a mark pointEditing a mark Press the Enter key to bring up the Menu screenExample of label editing Editing a mark positionDeleting a mark Edit the time data in the following mannerCreating a new project Project managementSelecting a project While Select is highlighted, pressEditing a project name Use the Menu dial to highlight Rename press the Enter keyRight Rolling back a projectName editing example Use the 3 key to enter aSaving a project to an external medium Use the Menu dial to highlight Roll back press the Enter keySelecting tracks Export screen detailsEditing the duration Use the Menu dial to highlight Export press the Enter keyCopying a stereo mix file to an external medium Press any operation keySelecting all files Selecting a desired fileSelect the files to be exported Protecting a project Deleting a projectDisplay now shows the project list screen Enabling USB connection Use the Menu dial to highlight USB and press the Enter keyWhile ? is flashing on the screen, press the Enter key Protecting the internal hard diskWhile USB to PC is highlighted, press the Enter key LR16 ECopying data from the LR16 to a computer Other functions Adjusting the display contrastSetting the footswtich function Press the Enter key to bring upInitializing the system memory Setting items DefaultFormatting the internal hard disk While holding down the Record key, press the Enter keyTo assign the destination channels of SUB Use the Menu dial to highlight Input and press the Enter keySoftware version upgrade MethodTurn on the LR16 Press the Enter key to bring up Menu screen Midi message supported by the LR16 Setting frame rateMidi synchronization Midi connectionSetting FS/Bit of project While Default FS menu is highlighted, press the Enter keyInput and Output Controller unit SpecificationsInput and Output Main unit Inputs/OutputsGeneral Physical dimensionsPower Consumption approx W Main unitMidi Implementation Chart Model LR16Declaration of EC Directive Affect of Immunity on This EquipmentForthe US Customers only Fostex America Limited Warranty Shipping Index 45, 52Page Fostex CO