Resetting the Speakerphone with the Softkeys
(When Powering Up the Voice Terminal)
When you first power up the voice terminal, the following display appears.
PLEASE RESET SPKR.
BeginCancel
When you set the speakerphone on your voice terminal, you hear a set of tones as the speakerphone performs an acoustic test of the environment. When the tones stop, your speakerphone has finished adjusting itself for optimal performance and is ready for use. For more information about the Reset Speakerphone feature, see “Reset Speakerphone” in the section Voice Feature Procedures later in this guide.
To reset the speakerphone (when the voice terminal is first powered up)
1Press the softkey below Begin to reset the speakerphone
(Press the softkey below Cancel if you do not want to reset the speakerphone at this time. However, note that the red light next to [ Speaker ] will continue to flutter.)
●If you press the softkey below Begin, the display shows the following timed screen:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
●You will hear a set of rising tones as the speakerphone adjusts itself to the surrounding acoustical environment. These tones are automatic. No user response is required.
15