Troubleshooting
Problem |
| Solution |
|
|
|
A feature doesn’t work | 1 | Reread the procedure and try again. |
as noted in this guide. | 2 | For many features you must lift the handset before |
| ||
|
| you can use the feature. |
| 3 | Check with your system manager to be sure this |
|
| feature is administered on your voice terminal. |
| 4 | You may have an older version System 75; thus, |
|
| some features may operate differently from the |
|
| procedures described in this guide. Check the |
|
| section below on “System 75 Version Notes” for |
|
| ways in which these features work differently. |
|
| |
There are no feature | See your system manager for a list of feature access | |
access codes written in | codes for features assigned to your voice terminal. | |
the appropriate blanks | Then, write the codes in this guide. | |
in this guide. |
|
|
|
|
|
Problem |
| Solution |
|
|
|
|
|
There’s no dial tone. | 1 | Check with your system manager to be sure your |
|
|
| voice terminal is administered correctly. |
|
| 2 | Make sure the handset and line cords at your voice |
|
|
| terminal are securely connected at both ends. |
|
| 3 | Press [ Test ] . If the green light next to [ Test ] does |
|
|
| not go on or flashes rather than goes on steadily, |
|
|
| the voice terminal is not communicating with the |
|
|
| PBX. |
|
| 4 | Find a working voice terminal of the same type as |
|
|
| your own. Unplug this voice terminal from its |
|
|
| modular wall jack. Plug your voice terminal into |
|
|
| that jack and check if it gets dial tone. |
|
| 5 | If your voice terminal still does not work, plug the |
|
|
| working voice terminal (of the same type) into |
|
|
| your modular wall jack. If the working voice |
|
|
| terminal has dial tone, your own voice terminal is |
|
|
| faulty. See your system manager. |
|
|
|
|
|
46