Problem |
| Solution |
|
| |
The telephone doesn’t | 1 Make sure the ringer is turned on. | |
ring. | 2 | Set the ringer volume to a higher level. |
| ||
| 3 | Place a test call from another extension to your |
|
| extension. |
| 4 | Check the line cord to make certain it is securely |
|
| connected at both ends. |
| 5 | If there is still a problem, see your system |
|
| manager. |
|
| |
The lights do not go on | 1 Press [ Test ] to check if the voice terminal lights go | |
next to the buttons. |
| on. |
| 2 | Check the line cord to make certain it is securely |
|
| connected at both ends. |
| 3 If there is still a problem, see your system | |
|
| manager. |
|
|
|
System 75 Version Notes
If you have Version 1 or 2 of System 75, some features may work a little differently than noted in this guide. The following list explains the slight differences in these procedures.
Note: If you are uncertain what version of the System 75 software your business is using, check with your system manager.
Feature | System 75 Version | Changes in Feature Operation | |
|
|
| |
Abbreviated | If you are using | You can store up to 16 digits | |
Dialing | Version 1 | rather than 24 digits. | |
| If you are using | You cannot use an Enhanced | |
| Version 1 or 2 | List. | |
|
|
| |
Call Forwarding | If you are using | You cannot forward someone | |
All Calls | Version 1 or 2 | else’s calls. | |
Last Number | If you are using | You can store up to 16 digits | |
Dialed | Version 1 | rather than 24 digits. | |
Priority Calling | If you are using | You cannot change a regular | |
call into a priority call. | |||
| Version 1 or 2 | ||
|
|
|
47