AT&T 8410 guide

message retriever A person authorized by the system manager to retrieve messages for other users.

off-hookWhen the handset is removed from the cradle (for example, when you lift the handset to place or answer a call) or when the speakerphone is turned on.

on-hookWhen the handset is left on the cradle and the speakerphone is turned off.

party A person who places or answers a call.

personal list One of the four types of Abbreviated Dialing lists; programmable by the system manager or by you, the user. Contains telephone numbers of your choice, and stores each of them as a single-digit list item.

personal list item One of the 10 available slots on an Abbreviated Dialing personal list. The first nine personal list items are given digits 1 to 9, with 0 for the tenth item.

pickup group A group of up to 25 voice terminal users who can answer calls for each other through the Call Pickup feature. Group members are determined by the system manager and are usually located in the same work area or perform similar job functions.

priority call An important or urgent call which sends a special 3-burst ring.

program/reprogram To use your dial pad to assign a telephone number to a

personal list item or an [ AD xxxxx ] for Abbreviated Dialing.

reset the speakerphone Press [ Shift ] and then [ Speaker ] to perform an acoustic test of the surrounding environment and adjust the speakerphone for optimal performance. (At power-up, press the softkey below Begin to start the Reset Speakerphone feature.)

retrieve To collect telephone messages with the Message or Voice Message Retrieval features. (Also, with Call Park, to resume a call from an extension other than the one where the call was first placed or received.)

ringer The device that produces the electronic ringing sound in your voice

terminal.

softkey features Those features accessed with the four arrowed softkeys ( [ ▲ ] ) and the display control buttons. A person using an 8410D (with display) can access up to 12 softkey features.

softkeys The four buttons below the display labeled with arrows ( [ ▲ ] ). These button correspond to words on the display screen. Softkeys can be used along with display control keys to access up to 12 features. (These features are in addition to those features assigned to the call appearance/feature buttons on your voice terminal.)

stored number A telephone number which has been programmed and stored as a 1-, 2-, or 3-digit list item for use with Abbreviated Dialing. It can be a complete or partial telephone number, an extension number, or a feature or trunk code. Once programmed, a number can be accessed by first dialing the list, then the list item digit(s) under which it is stored. If the number is stored on an [ AD xxxxx ] , the number can be accessed by simply pressing that button, and then dialing the appropriate entry number.