Last Number Dialed, Leave Word Calling LWC

To answer any

1 Pick up handset

intercom call

●You are connected to call

Note: If you are active on another call, first press [ Hold ] , then press flashing [ xxxxx ] . To return to the held call, press [ xxxxx ] of the held call.

Last Number Dialed

You can access this feature with the softkeys only if your voice teminal has a display and if the feature’s abbreviation, Last, appears on the second line of one of the feature option screens.

To automatically redial the last number you dialed (up to 24 digits) (extension, outside number, or trunk/feature access code)

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below Last

(while on-hook or off-hook)

If your 8410 does not have a display or if Last is not

available on your display, press [ LastDialed ] (while on-hook or off-hook)

or Dial Last Number Dialed access code (while on-hook or off-hook)

Leave Word Calling (LWC)

You can access the feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, LWC (for the Leave Word Calling feature) or CnLWC (for the Cancel Leave Word Calling feature), appears on the second line of one of the feature option screens.

To leave a message after dialing an extension (when your call is not answered, you hear a coverage or busy tone, or you have been put on hold)

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below LWC before

hanging up your handset

If your 8410 does not have a display or if LWC is not

available on your display, press [ LWC ] before

hanging up your handset

[confirmation tone]

●Message light goes on at called voice terminal (if so equipped)

Note: If reorder tone is heard, message is not stored; try again.