Mute, Priority Calling | AT&T 8410 guide

Go to Cvr

Mute	✔

Note: When you are talking on the handset, the Mute feature affects the microphone associated with the handset rather than the speakerphone.

This feature has no effect on an external speakerphone attached to your voice terminal.

To prevent the other party from hearing you (To mute the handset or speakerphone microphone)

1Press [ Mute ]

●Red light next to [ Mute ] goes on and the other party cannot hear you

2When you are ready to resume conversation with the other party, press [ Mute ] again

●Red light next to [ Mute ] goes off and the other party can hear you again

Note: When the voice terminal is set for the Speaker (listen-only) feature, the light next to [ Mute ] goes on whenever you are using the speaker.

The Mute feature turns off automatically when you hang up, or switch from the speakerphone to the handset or from the handset to the speakerphone.

Priority Calling

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, PCall, appears on the second line of one of the feature option screens.

To place a priority call (3-burst ring)

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below PCall

(while on-hook or off-hook)

If your 8410 does not have a display or if PCall is not available on your display, press [ Priority ] (while on-hook or off-hook)

or Dial Priority Calling access code
(while on-hook or off-hook)	[dial tone]
2 Dial the extension	[ringback tone]
● Wait for called party to answer

Note: If your call is not answered and you wish to

redirect it to coverage, press [ ] while call is ringing.