AT&T 8410 manual Automatic Callback

Automatic Callback

You can access this feature with the softkeys only if your voice terminal has a display and if the feature’s abbreviation, AutCB, appears on the second line of one of the feature option screens.

To automatically place another call to an extension that was busy, did not answer, or returned a call waiting ringback tone

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below AutCB during call attempt

If your 8410 does not have a display or if AutCB is not available on your display, press [ AutoCallBk ]

during call attempt [confirmation tone]

Note: If you send your calls to coverage after activating Automatic Callback, your callback calls will still ring at your extension and will not be redirected to coverage.

2Hang up

●You will get a 3-burst priority ring when both you and the called extension are idle; when you answer, regular ringing is sent to the called party

3Lift handset when you hear priority ring

Note: Automatic Callback is automatically canceled after 30 minutes.

To cancel Automatic Callback

1If you are using an 8410 with a display, press [ Menu ] and then press the softkey below AutCB again (while on-hook)

If your 8410 does not have a display or if AutCB is not available on your display, press [ AutoCallBk ] again (while on-hook)

19