Quick Setup Guide
1.Make sure all items listed on the front of this guide are included in the box.
2.READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3.Study this setup diagram.
4.Place the drum station in an appropriate position for operation – either on a flat surface, such as a table or attach to a drum clamp set mount (sold separately).
5.Make sure all speaker devices are turned off and all volume knobs/faders are at “zero.”
6.Connect all input sources as indicated in the diagram.
7.Connect the outputs to headphones, and/or powered amplifier stereo system.
8.Plug in both power adapters and other devices into AC power.
9.Switch everything on in the following order.
a.iED04 Digital Drum Station.
b.Any external devices.
c.Any external speakers.
10.When turning off, always reverse this operation by,
a.Any external speakers.
b.Any external devices.
c.iED04 Digital Drum Station.
NOTE: Speakers, external sound device, additional triggers and CD player are NOT included. As shown in the above figure, the supplied RCA cable is used to connect to an external amplifier, mixer, or a home stereo systems.
Getting Started
This section will cover how to begin using your Digital Drum Station. Be sure that your setup matches the diagram as previously shown.
•Be sure that the iED04 is powered on.
1.While the unit is powered on, turn the volume up on the back panel half way.
2.Strike the drum pads with the included sticks. This should produce a sound.
2