AMX NXM-MHS, NXC-M/ME/MPE instruction manual Edit User Menu

Page 36
4) Edit User

NetLinx Security

2.At the Enter user name prompt, enter a new user name (for example "Bilbo"). A user name is a valid character string (4 - 20 alpha-numeric characters) defining the user. This string is case sensitive. Each user name must be unique.

3.Press <ENTER> to enter the new user name. The session then prompts you for a password for the new user.

4.Enter a password for the new user. A password is a valid character string (4 - 20 alpha-numeric characters) to supplement the user name in defining the potential client. This string is also case sensitive.

5.The session then prompts you to verify the new password. Enter the password again, and press

<ENTER>.

6.Assuming the password was verified, the session then displays the Edit User menu (see below).

4) Edit User

1.Type 4 and <ENTER> at the Security Setup prompt (at the bottom of the Main Security Menu) to edit an existing user account. A sample session response is:

Select from the following list of enrolled users:

1)administrator

2)Fred

3)Betty

4)Bilbo

Select User:

2.Select the user account (1-X) that you want to edit, and press <ENTER> to display the Edit User Menu (described below).

Any changes made via the Edit User menu will affect the selected user account.

Edit User Menu

The Edit User Menu is accessed whenever you enter the Add user, or Edit user selections from the Main Security Menu. The Edit User Menu is displayed as follows:

Please select from the following options:

1)Change User Password

2)Change Inherits From Group

3)Add Directory Association

4)Delete Directory Association

5)List Directory Associations

6)Change Access Rights

7)Display User Record Contents

Or <ENTER> to return to previous menu

Edit User ->

Each selection (1-7) accesses the named option. Press <ENTER> by itself to exit the menu and return to the Main Security Menu.

The Edit User Menu options are described in the following table:

 

30

NetLinx Master Cards and Modules

 

 

 

Image 36
Contents NetLinx Master Cards and Modules instruction manualNXM-MHS, NXC-M/ME/MPE NetLinx Central Controllers and CardsAMX Limited Warranty and Disclaimer Table of Contents Installation and WiringProduct Information - NetLinx Modules NXC-M Master CardProgramming NetLinx SecurityProgram Port Commands NetLinx Security FeaturesDefault Security Configuration Setup SecurityMain Security Menu Logging Into a SessionTable of Contents Product Information - NetLinx Modules NXM-MHS NXM ModulesNXM-MHS specifications NXM-MHS SpecificationsNXM-MHS Specifications Cont Program Port DIP switch - baud rate settingsBaud Rate Settings Program Port DIP switch - Program Run Disable PRD modePRD Mode Settings Setting the Program Port DIP SwitchProgram Port Connections/Wiring DB-9 Program Port, Pinouts, and Signals5-Pin Program Port Pinouts and Signals DB-9 Program port front panelModes and front panel LED blink patterns Modes and LED Blink PatternsRear panel LEDs ICSNet/ICSHub Rear panel LEDs AXLinkRear panel LEDs Ethernet ME and MPE only Specifications NXC-M Master CardNXC-M Master Card Specifications NXC-M Master CardInstalling an optional NCP-E Ethernet Card Rear panel components3. Mount the NCP-E to the NXC-M, as shown in FIG NXC-M Master Card NXC-ME Master-Ethernet Card NXC-ME SpecificationsNXC-ME Master-Ethernet Card Ethernet Ports used by the ME Ethernet Ports used by the MEPort Type Standard Port #NXC-MPE Master Port Expander Card NXC-MPE SpecificationsNXC-MPE Master Port Expander Card SPE Port Connection/Wiring Ethernet 10/100 LEDs Ethernet 10/100 connectorICSNet connectors/LEDs ICSHub In/Out connectors/LEDs FIG. 9 NXC-MPE Card shown mounted in a NXS-MHS Module - rear viewSPE Connector Pinouts and Signals SPE Cable pinout informationNXC-MPE Master Port Expander Card Installation and Wiring Mounting the Modules Into an Equipment RackMounting the Master Cards in an NXF CardFrame or NXI ICSNet RJ-45 Connections/Wiring Preparing/connecting captive wiresICSNet RJ-45 Pinouts/Signals ICSHub RJ-45 Connections/Wiring Ethernet 10/100 Base-T RJ-45 Connections/WiringISCHub Pinouts and Signals Ethernet RJ-45 Pinouts and SignalsReplacing the Lithium Batteries Program Port Commands ProgrammingPC COM Port Communication Settings Program Port CommandsProgram Port Commands Cont SET TIME ESC Pass Codes Notes on specific Telnet/Terminal clientsESC Pass Codes Windows client programsNetLinx Security Features NetLinx SecuritySecurity Terms Used in This Document NetLinx Security FeaturesPassword Access RightsUser Name Group NameInitial Setup via Telnet or Terminal connection Accessing the Security configuration optionsGetting connected If NetLinx master security is not enabled, you will see the following Security Options Menu 2 Display system security options for NetLinx master3 Add user 4 Edit User Edit User MenuAccess Rights Menu Access Rights MenuEdit User Menu Access Rights Menu Cont 5 Delete user6 Show the list of authorized users 7 Add GroupEdit Group Menu Add directory association Edit Group menu Delete directory associationEdit Group menu Change Access Rights Edit Group menu Display Access RightsEdit Group menu List directory associations 8 Edit Group11 Set Telnet Timeout in seconds 12 Display Telnet Timeout in seconds9 Delete Group 10 Show List of Authorized GroupsMain Security Menu Main Security MenuDefault Security Configuration Main Security Menu ContSecurity Help menu Security Help Menu OptionsLogging Into a Session Security Help Menu Options ContLogout Setup SecurityHelp Security Programming to alter specifications Panja IncAMX logo AMX reserves