Meco 6512S0DT91, 6212S00T91 manual Model Wheel Assembly

10

Step 7 (Model 6212)

Wheel Assembly

Place the Tank Support between the Left Legs so the holes in the end align with the holes in the legs with the flanges facing up. The flanges have notches with different spacing; the side with the notches closer together should be to the inside of the cart.

Insert an Axle through the Wheel, the leg tube and the Tank Support end. Fasten in place by inserting an Axle Pin through the small hole near the end of the Axle.

Axle (not shown to scale) 2 pc

Axle Pin

2 pc

Narrow notch spacing to inside

Axle Pin

Tank Support

Axle Pin

Axle

Step 7 (Model 6512)

Wheel Assembly

Insert an Axle through the Wheel and the leg tube. Fasten in place by inserting an Axle Pin through the small hole near the end of the Axle.

Place the Tank Support between the Left Legs so the holes in the ends align with the holes in the legs above the axle holes. Orient with the flanges facing up. The flanges have notches with different spacing; the side with the notches closer together should be to the inside of the cart. Fasten the ends to the legs with two 1/4-20 x .39” Bolts.

1/4-20 x .39” Bolt

2 pcs

1/4-20 x .39” Bolt

Tank Support

Axle

Axle Pin