Parts List- Model / 6212S00T91 / 6512S0DT91

If you need replacement parts, refer to the Parts Illustrations to find the exact parts you need. If you have any questions or need help, contact Customer Service at 1-800-251-7558or go to www.aussiegrills.com. Be sure to have the grill model number and serial number printed on the black label, located on the back of the cart shroud. If you need a replacement part under warranty, a proof of purchase will be necessary. You will be asked to forward your proof of purchase via e-mail or to fax your proof of purchase to 423-639-1055 and reference your model and serial number. It is important to register your grill and retain your receipt.

When ordering parts, it is VERY important to have the complete Model Number to receive the correct replacement parts for your grill.

Key	Description	Quantity
1	Hood		1
2A	Handle Shield (6512 only)		1
3	6212 Hood Handle		1
3A	6512 Hood Handle		1
4	Hood Hinge Half		2
5	Warming Rack		1
6	6212 Cooking Grid		1
6A	6512 Cooking Grid		2
7	Flavor Activator		1
8	Flavor Activator Support		2
9	Main Burner		1
10	Main Electrode Assembly		1
11	Bowl Hinge Half		2
12	Bowl		1
13	Bowl Support		2
14	Manifold Assembly		1
15	Control Panel		1
16	Burner Control Knob		2
17	Piezo Igniter (6212 only)		1
17A	Electric Igniter (6512 only)		1
18	Drip Cup Holder Wire		1
19	Drip Cup		1
20A	CP Heat Shield (6512 only) 1
21	Tank Blocking Wire 6212		1
21	Tank Blocking Wire 6512		2
22	Top U-Frame		2
23	Side Table		2
24	Tank Locking Plate		1
25	Tank Side Brace		1
26	Left Leg		2
27	Right Leg		2
28	Right Tube Brace		1
29A	Tank Shield (6512 only)		1
30	Tank Support		1
31	Wheel		2
32	Shroud		2
33	Crossbrace		3
34	Foot Cap (6212 only)		2
34A	Foot Cap (6512 only)		2
35	Regulator Assembly		1
36	Center Brace		1

Hardware Pack (Model 6212)

DescriptionQuantity

1/4-20 x .39” Bolt	15
1/4-20 x .39” Bolt w/Fiber Washer	10
1/4-20 x .59” Bolt w/Fiber Washer	4
1/4-20 x 1.1” Bolt	6
1/4-20 x 1.97” Bolt	4
1/4-20 x 1.2” Stair Screw	8
1/4-20 x .59” Thumb Screw	2
1/4-20 Hex Nut	22
5/32-30 x .31” Bolt	4
5/32-30 x .39” Bolt	5
#5 x .31” Tapping Screw	3
Thermal Baffle Washer	2
Hood Hinge Axle	2
Axle Pin	4
Wheel Axles	2

Hardware Pack (Model 6512)

DescriptionQuantity

1/4-20 x .39” Bolt	19
1/4-20 x .39” Bolt w/Fiber Washer	10
1/4-20 x .59” Bolt w/Fiber Washer	4
1/4-20 x 1.1” Bolt	6
1/4-20 x 1.97” Bolt	4
1/4-20 x 1.2” Stair Screw	8
1/4-20 x .59” Thumb Screw	2
1/4-20 Hex Nut	24
5/32-30 x .31” Bolt	4
5/32-30 x .31” Bolt with Nut	2
5/32-30 x .39” Bolt	5
#5 x .31” Tapping Screw	3
Hood Hinge Axle	2
Axle Pin	4
Wheel Axles	2