Meco 6512S0DT91, 6212S00T91 manual Carbon Monoxide Hazard, Tools Required for Assembly

Page 2

2

!DA N G E R

CARBON MONOXIDE HAZARD

This appliance can produce carbon monoxide which has no odor. Using it in an enclosed space can kill you. Never use this appliance in an enclosed space, such as a camper, tent, car, or home.

!WARNING

To reduce the risk of serious injury or death from fire or explosion:

Never leave grill unattended

Never use alcohol, prescription or non-prescription drugs while assembling or safely operat- ing this appliance.

Keep children and pets away at all times.

Do not connect to the LP Gas Cylinder until assembly is complete except as noted for “First Time Use” leak test as detailed on pages 24-25.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

Always have a type BC or ABC fire extinguisher readily available.

!CAUTION

To reduce the risk of a laceration hazard, wear protective gloves when handling parts that have sharp edges.

NOTICE

Meco Corporation strives to be a quality supplier of consumer products. If we omitted any parts needed for assembly, or you need troubleshooting information, please contact us using our toll free number or visit our web site.

It is important to register your grill and retain your receipt.

1-800-251-7558

8 am - 5 pm E.S.T. Monday - Friday

1-423-639-1171 (Telephone)

1-423-639-2570 (Fax)

Register your grill @ www.aussiegrills.com

Consumer Service Department

MECO CORPORATION

1500 Industrial Road

Greeneville, TN 37745 USA

Tools Required for Assembly:

Phillips Screwdriver

Pliers OR Wrench

Image 2
Contents DA N G E R Tools Required for Assembly Carbon Monoxide HazardContents Preparation for AssemblyParts Illustration Model 6212S00T91 / 6512S0DT91 DescriptionQuantity Parts List- Model / 6212S00T91 / 6512S0DT91Key Description Quantity Assembly Instructions Step Frame IdentificationStep Step Shroud to Leg AssemblyFront Crossbrace Assembly Step Tank Side Brace & Top Crossbrace Assembly Back ViewStep Crossbrace & Right Tube Brace Assembly Step Tank Locking Plate & Center Crossbrace AssemblyModel Wheel Assembly Step Bowl Support & Hinge Half Assembly Step Drip Cup Wire AssemblyStep Main Burner Assembly 6512 only Tank Heat Shield AttachmentStep Bowl to Cart Assembly Step Manifold Assembly Piezo Igniter Assembly on ModelStep Control Panel Assembly Control Panel Heat Shield Model 6512 onlyModel Step Main Burner Electrode AssemblyElectrode Wire Plug Assembly Step Side Table Assembly Step Hood Hinge Half AssemblyStep Hood Handle Assembly Step Hood/Hinge AssemblyStep Flavor Activator / Warming Rack Assembly Step Cooking Grid / Control Knob AssemblyStep Tank Blocking Wire Assembly Step Drip Cup Assembly Step Battery Installation 6512 onlyLP Gas Cylinder Connecting/Disconnecting the GasUsing Gas LP Hose and Regulator Connecting LP Gas CylinderDisconnecting LP Gas Cylinder Selecting a Location Before Using Your LP Gas GrillInstallation Codes Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Lighting the Grill Using the Ignitor Check The FlameManual Lighting of the Grill on Off positionManually Lighting the Grill Cooking On the Gas Grill Grill Cooking Direct MethodIndirect Cooking Roasting Roasting Indirect MethodDirect Cooking on the Grids Warming Rack Care and MaintenanceCleaning the Grill End of Cooking SessionCooking Grid/Flavor Activators All Other CleaningHow to Clean the Burners BurnersStorage See Grill Cart, Bowl and Hood pTroubleshooting EmergenciesSee How to Clean Burners in Care and Maintenance Clean the Burners. See How to Clean Burners in CareMaintenance Problem Important NoticeLimited Warranty Meco Corporation Limited Warranty