Meco 6512S0DT91 manual Control Panel Heat Shield Model 6512 only, Step Control Panel Assembly

14

Step 12C

Control Panel Heat Shield - Model 6512 ONLY

5/32-30 x .31” Bolt

Tuck top flange of 6512 Control Panel Heat Shield under the top flange of the inside of the Control Panel so that the holes align. Insert two 5/32-30 x .31” Bolts through the holes in both parts and fasten in place with two 5/32-30 Nuts

5/32-30 x .31” Bolt

2 pcs

5/32-30 Nut

6512 Control Panel Heat Shield

5/32-30 Nut

2 pc

Step 13

Control Panel Assembly

Insert the Control Panel between the front legs and aligning the holes in the ends of the Control Panel with the holes in the edges of the legs. Verify that the valve nozzles are inserted in the ends of the burner tubes (See Detail) and that the regulator hose is over the Tank Side Brace.

From the outside edge of each front leg, insert two 1/4-20 x 1.97” Bolts through the leg tube and into threaded inserts on the inside of the Control Panel.

	Detail
Valve	Valve
	Nozzle
Stem

Control	Burner
Panel	Tube

1/4-20 x 1.97” Bolt

4 pcs

Control Panel