Meco 6212S00T91, 6512S0DT91 manual Step Shroud to Leg Assembly, Front Crossbrace Assembly

7

Step 2

Shroud to Leg Assembly

The next 2 steps are best performed on a smooth level surface (and/or with the help of a second person)

Place the shroud on Leg Frames as shown. Install a 5/32-30 x .39” bolt through each bottom corner of the shroud and into the threaded insert in the inside face of the legs. Next, insert a 1/4-20 x 1.1” bolt through the front of the right frame, through the shroud and fasten in place with a 1/4-20 nut.

The views below are shown with what will be the “FRONT” of the cart facing down.

5/32-30 x .39” Bolt

2 pcs

Left Leg

1/4-20 Nut

1/4-20 x 1.1” Bolt

1 pcs

1/4-20 x 1.1” Bolt

1/4-20 Nut

1 pc

Step 3

5/32-30 x .39” Bolt

Right Leg

Front Crossbrace Assembly

Assemble one Crossbrace to the inside of the front legs as shown with the short flange of the Crossbrace to the top. Install 4) 1/4-20 x .39” bolts through the holes in the Crossbrace and into the threaded inserts in the inside face of the legs.

1/4-20 x .39” Bolt

4 pcs