Cisco Systems CGS 2520 manual Management Options

Chapter 1 Product Overview

Management Options

•Two low-voltage DC

•One high-voltage AC or DC and one low-voltage DC

For information on installing the power supply modules, see the “Power Supply Installation” section on page 3-1

See Table 1-4for information on the power supply LEDs.

Management Options

•Device manager

You can use the device manager in the switch memory to manage standalone switches. For information, see the switch getting started guide and the device manager online help.

•Cisco IOS CLI

You can configure and monitor the switch from the CLI. Connect your management station to the switch console port or use Telnet from a remote management station. See the switch command reference on Cisco.com for information.

•CiscoWorks application

The CiscoWorks LAN Management Solution (LMS) is a suite of management tools that simplify the configuration, administration, monitoring, and troubleshooting of Cisco networks. See the LMS documentation for information: http://www.cisco.com/en/US/products/ps7198/tsd_products_support_series_home.html

•CiscoView application

The CiscoView device-management application displays a switch image that you can use to view switch status and performance information and to set configuration parameters. The CiscoView application (sold separately) can be a standalone application or part of a Simple Network Management Protocol (SNMP) platform. For information, see the CiscoView documentation: http://www.cisco.com/en/US/products/sw/cscowork/ps4565/tsd_products_support_series_home.ht ml

	Cisco CGS 2520 Hardware Installation Guide
OL-31444-01		1-15