Cisco Systems CGS 2520 manual Cables and Adapters, SFP Module Cables, Industrial and Rugged SFPs

Appendix B Connector and Cable Specifications

Cables and Adapters

Cables and Adapters

•SFP Module Cables, page B-4

•Cable Pinouts, page B-6

•Console Port Adapter Pinouts, page B-8

SFP Module Cables

Each port must match the wave-length specifications on each end of the cable, and for reliable communications, the cable must not exceed the allowable length. Copper 1000BASE-T SFP transceivers use standard four twisted-pair, Category 5 (or greater) cable at lengths up to 328 feet (100 meters).

Note The maximum operating temperature of the switch varies depending on the type of SFP module that you use. See Table 1-2 on page 1-6for information on the supported temperature ranges.

Table B-1	Fiber-Optic SFP Module Port Cabling Specifications
				Core	Modal
Type of SFP		Wavelength		Size/Cladding	Bandwidth
Module		(nanometers)	Fiber Type	Size (micron)	(MHz/km)1	Cable Distance
Industrial and Rugged SFPs
1000BASE-SX		850	MMF	62.5/125	160	722 feet (220 m)
(GLC-SX-MM-				62.5/125	200	902 feet (275 m)
RGD)				50/125	400	1640 feet (500
				50/125	500	m)
						1804 feet (550
						m)
1000BASE-LX/		1310	SMF	G.6522	—	32,810 feet (10
LH						km)
(GLC-LX-SM-
RGD)
100BASE-LX		1310	SMF	G.6522	—	32,810 feet (10
(GLC-FE-100L						km)
X-RGD)
100BASE-FX		1310	MMF	50/125	500	6,562 feet (2
(GLC-FE-100F				62.5/125	500	km)
X-RGD)						6,562 feet (2
						km)
1000BASE-ZX		1550	SMF	G.6522	—	43.4 to 62 miles
(GLC-ZX-SM-						(70 to 100 km)2
RGD)
Commercial SFPs
1000BASE-BX		1490 TX	SMF	G.6523	—	32,810 feet (10
10-D		1310 RX				km)
(GLC-BX-D)

Cisco CGS 2520 Hardware Installation Guide

B-4 OL-31444-01