Cisco Systems CGS 2520 Attaching Brackets for 23-Inch Racks, Attaching Brackets for 19-Inch Racks

Chapter 2 Switch Installation

Installing the Switch

Figure 2-10 Attaching Brackets for 19-Inch Racks

1

2

Phillips flat-head screws 3 Power supply-side mounting position

Cable-side-mounting position

Note For IP-30 compliance: If you use 23-inch brackets or ETSI brackets, you can insert the rubber plugs in the same holes as shown in Figure 2-6and Figure 2-7before installing the brackets.

Attaching Brackets for 23-Inch Racks

Figure 2-11shows the 23-inch rack mounting bracket locations on the switch for cable-side mounting and power-side mounting onto a 23-inch rack.

	Cisco CGS 2520 Hardware Installation Guide
2-12	OL-31444-01