GE Monogram Professional Outdoor Grills and Cooktop Grill Cutout Gas and Electrical Locations

Installation Preparation

OUTDOOR GRILL, COOKTOP AND ACCESSORY CUTOUT DIMENSIONS

12" Min.

Separation

28-3/4" for 30" Models Between Cutouts

40-3/4" for 42" Models

52-3/4" for 54" Models

11-7/8"

24-1/2"

Grill Cutout

	Gas and Electrical Locations
24-1/2"
Outdoor				24"
Cooktop			Trash Bin
ZGU122	10-7/8"		ZX18TC
		2-Drawer
		Storage
	18-9/16"	ZX18DS

	1-1/8"	Access Doors	18-1/4"	16"
36"		ZX27AD		*See Note.
	Min.			17-1/4"
Min.

2-1/4" min.

24-1/8"*Note: When installing more than one accessory below the countertop, align the accessories across the bottom by adjusting the dimension above the floor. The cutouts must be offset depending on the product overlap below the cutout. Overlap for ZX27AD is 7/8", for ZX18DS is 1-1/4" and for ZX18TC is 1-3/16".

Gas and Electrical Locations

3-1/2"	10" Min.
	3-1/2"
	7-3/8"

GAS LOCATION:

Cut a 3-1/2" dia. hole for the manifold connection as shown for LP tank or stationary gas line connections.

	ELECTRICAL LOCATION:
2"	Cut a 1" dia. hole
	at the back left side
	of the cutout.

• The grill and outdoor cooktop drops into the opening and

hangs from the side flanges. A deck is not required for

support on the bottom.

• The construction must be level and stable and capable

of supporting up to 400 lbs.

• The opening for the cooktop must be 24-1/2" deep from

the front of the countertop. Cut a 1" dia. hole below the

cooktop for the drain hose.

• Cut a 1" dia. hole at the back left side of the cutout

for the grill’s electrical connection.

• A 120 volt outlet must be located within reach of the grill’s

3-1/2" Dia. Hole	3-1/2" Dia. Hole
for Stationary	for LP Tank Hose
Gas Line

•If the countertop has an overhang, it must be notched or cut back flush with the front face of the cabinet below. This will allow the grill or side burner to fit flush at the front.

Countertop Notch Detail

Depth to

Cabinet Face

5/8" for Grills

9/16" for Outdoor Cooktop

6' power cord. The transformer bracket must be mounted

within 3-1/2 feet of the outdoor grill.

• Maintain 12" separation between cutouts for an outdoor

grill and an outdoor cooktop installation.

Rotisserie

Connection

The grill rotisserie connection is on the left side near the front. Installation into a 24-1/2" front-to-back opening allows access to the rotisserie outlet.

11