Installation Preparation
REMOVE PACKAGING FROM CART MODELS (cont.)
8.Position the blade of the dolly next to the right side of the grill. Tilt the grill back and away to allow blade to slip under the wheels.
NOTE: The wheels must rest on the blade of the appliance dolly.
Secure the appliance dolly belt around the grill above or below
the controls to avoid damage to the knobs.
9.Tilt and lift with the appliance dolly to remove the skid from below the grill.
10.Roll the grill into operating position. Reinstall the shelf on the right side.
11.Remove the tie holding the sear burner (on some models). Lift the wire mesh cover on the sear burner and remove packaging. Carefully, replace the wire mesh cover. The wire mesh must be wrapped around the vertical side flanges.
Wheels must be 
positioned ON the
blade of the appliance dolly.
Lift wire mesh and remove packaging.
Replace wire mesh cover.
14