Installation Instructions
INSTALL BRACKET WITH TRANSFORMER (Built-In Models Only)
•Mount the bracket to the back wall of the enclosure with 4 screws (not supplied).
•Slide the battery compartment from the top, straight down, engaging the side slots.
Battery/Fuse
Compartment
Bracket
Side Slots
NOTE:All connectors are polarized to connect correctly.
•Join transformer connectors.
•Join battery connectors.
•Route the power cord through the enclosure to the electrical outlet .
Battery Connectors
Transformer
Connectors
Power Cord
INSTALL COOKTOP BRACKET WITH BATTERY COMPARTMENT
•Mount the bracket to the back wall of the enclosure with 4 screws (not supplied).
•Slide the battery compartment from the top, straight down, engaging the side slots. (If necessary, the bracket may be factory- assembled.)
•Join battery connectors.
Battery Connectors
SECURITY LOOP
A stainless steel loop is welded to the bottom of the
Loop for securing
19