GE Monogram Professional Outdoor Grills and Cooktop Remove Packaging from Cart Models

Installation Preparation

REMOVE PACKAGING FROM CART MODELS

1.Cut the banding. Use a box cutter or utility knife to score and cut the carton along the base (or remove the staples with a staple remover or a screwdriver).

2.Lift the carton straight up and off of the grill.

Cut the banding with tin snips.

6.Open the lid. Cut plastic ties and bands.

Score and cut.

3. Remove all outside packing materials.

7. The right-side shelf must be removed when using an appliance dolly to lift the grill off the skid.

A. On the right side of the grill, remove the screw from the back side of the shelf.

Parts

Package

Grill Grates

Parts

Package

4.Remove the parts packages on each side at the bottom.

5.Remove the screws from the hold-down board on the right side of the skid to allow the appliance dolly to

slip under the wheels.

NOTE: When using an appliance dolly, the grill must be handled and removed from the right side. The right- side wheels do not rotate.

Hold-Down

Board

B. Slide the shelf out of the holding pin at the front end of the bracket .

Holding Pin

13