Installation Instructions
ZX18TC TRASH BIN
24"
16"
Mounting Screws (10) |
•Cut the opening to the dimensions shown. Reinforce the inside of the opening using at least 1" wide material surround to accept the
NOTE: If you are installing another accessory into the same enclosure, measure and cut the openings to accommodate the bottom overlaps and align them evenly across the bottom.
•Separate the mounting frame from the trash bin door. Pull tab ends of the spring hinge pins outward to disengage the bin.
•Insert the frame through the opening.
•Install 10 screws (provided).
•Tilt the trash bin rear retaining lip into the frame first.
•Secure the trash bin to the frame by engaging the spring hinge pins at the bottom.
Spring Hinge Clips (2)
Overlap
Retaining Lip
26"
18"
1" Thick
Door
22