Desa LMFP33PR(A) installation manual Models LMFP33PRA and LMFP33NRA, Middle

INSTALLATION

Continued

Left Top Log (#4)

Right Top

Log (#5)

Figure 28 - Installing Top Logs

Models LMFP33PRA and LMFP33NRA

1.Place the base of the middle log (#1) in the U-shaped slots of the grate base. The cutout on the right of the middle log should fit over the burner (see Figure 29). Make sure the front of the middle log is resting on the tabs of the grate base and the cutout area is centered over the burner “U” bend.

2.Locate pegs on the bottom of back log (#2). Slide these pegs into the holes in the grate base behind the burner (see Figure 30).

3.Locate the notches in the bottom of the front log (#3). Place the front log on the grate fin- gers. Make sure the notches of the front log line up with the grate fingers (see Figure 31).

4.Place crossover log (#4) onto the pin (right) on back log (#2) and into the recess of the middle log (#1) (see Figure 32).

	Middle
	Log (#1)
Tab
Burner	“U” Bend
	U-Shaped
	Slot
Figure 29 - Installing Middle Log (#1)
(Base may very from illustration)

WARNING:You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.

Back Log (#2)

Hole in

Grate

Base

Peg

Burner

Figure 30 - Installing Back Log (#2) (Base may very from illustration)

Front Log

(#3)

Notches

Grate Finger

Figure 31 - Installing Front Log (#3) (Base may very from illustration)

Crossover

Log (#4)

Peg Recess

Figure 32 - Installing Crossover Log (#4) (Base may very from illustration)

18 www.desatech.com 111604-01L