Sears 125.15884800 owner manual Step

OR

Step 14

Insert the temperature gauge with bezel through the mounting hole in the front of the door. Place back plate and a hex nut onto the temperature gauge stem from the inside of the door panel and tighten it firmly.

Step 15

Place one end of the S-Hook around the regulator neck or hose as shown.

Step 16

Using a set of pliers, crimp the S-hook securely to the hose/regulator so that it can not be removed from the assembly.

Step 17

When an LP tank is not attached to the smoker, use the S-Hook to hang the hose/regulator from the carry handle on the side of the smoker. This will help prevent dirt and other particles from plugging the end of the assembly.