![](/images/new-backgrounds/1256329/25632915x1.webp)
Step 4
Set the burner assembly onto the cabinet as shown.
IMPORTANT: The burner tube must slide properly onto the gas valve orifice as shown.
Step 5
Secure the burner assembly with the three
Step 6
Attach the loose igniter wire to the igniter on the control panel as shown below.
Note: With the help of a friend, turn the smoker body to its upright position. Try to minimize stress on legs.
CAUTION: Make sure the valve gas orifice slides and fits into the burner tube.
Step 7
Set the smoke stack on top of the cabinet and line it up with the corresponding holes. Insert three
Burner Tube
Igniter
Gas Valve
Orifice
8