Weber 3500 LX owner manual Install manifold bracket, Purge air from gas lines

Step 13

Install manifold bracket

You will need: manifold bracket.

Hook the bracket onto the manifold at the center burner valve. Figure 20. Place your hand underneath the bracket. Lift the bracket, manifold and cooking box slightly as a unit and hook onto the frame brace. Figure 21 (a).

Frame brace

Manifold bracket

(a)

Figure 20

View from below cooking box

Step 14

Purge air from gas lines

You will need: one burner control knob.

mDANGER

Be sure there are no sparks or open flames in the area while purging. This can cause fire, explosion or serious bodily injury.

It is necessary to bleed the air out of newly installed gas lines. Turn gas supply ON at the source. Put on the front burner control knob. Push the front burner control knob down and turn to HI. When you start to smell gas, turn front burner control knob to OFF. Figure 21.

Figure 21

21