Weber 3500 LX owner manual Lighting the side burner, Lighting only the side burner. Figure

Page 30

Lighting the side burner

The side burner has a separate ignition system from the main cooking box.

mDANGER

Failure to open lid while igniting the side burner, or not waiting 5 minutes to allow gas to clear if the side burner does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

Lighting only the side burner. Figure 3.

1)Open the side burner lid.

2)Check that the side burner valve is OFF (push down and turn clockwise), and all main burner control valves are OFF (push down and turn clockwise).

3)Turn gas supply valve on.

4)Push down and turn the side burner control valve to HI.

5)Push the side burner igniter button several times so it clicks each time.

1

4

2

5

Figure 3

mCAUTION: Side burner flame may be difficult to see on a bright sunny day.

mWARNING: If the side burner does not light:

a)Turn OFF the side burner control valve.

b)Wait 5 minutes to let the gas clear before you try again or try to light with a match.

Lighting the side burner if the main burners are lit. Figure 4.

1)Open the side burner lid.

2)Push down and turn the side burner control to HI.

3)Press the side burner igniter button several times so it clicks each time.

1

2

3

Figure 4

mCAUTION: Side burner flame may be difficult to see on a bright sunny day.

mWARNING: If the side burner does not light:

a)Turn OFF the side burner control valve.

b)Wait 5 minutes to let the gas clear before you try again or try to light with a match.

30

Image 30

Contents Genesis 3500 LX MDANGER MWARNINGS LP GAS Units onlyWarranty Patents and Trademarks Contents Storage Gas supply testingGeneral Instructions Operating areaGeneral Specifications for Piping Typical natural gas supply installation to a wood deck Recommended concrete pad requirements Assembly Check package contentsStep Page Check contents of hardware packs Continue frame assembly Assemble frameInstall side burner locks Measure and drill holesMCAUTION a minimum of 2 bolts are required on each side Method 1 Concrete Method 2 Concrete Method 3 ConcreteMethod 4 Wood deck Tighten all frame bolts Add cooking boxSpacer a bracket Frame cross piece Install igniter Connect barbecue gas supply line to the natural gas supplyInstall side burner Check all valves are offMWARNING Make sure gas supply is OFF Install manifold bracket Purge air from gas linesCheck for gas leaks MWARNING Do not ignite burners while leak checkingInstall side panels Add base panelInstall Flavorizer Bars and Cooking Grates Install the bottom trayInstall Lid Add tool holders, control panel and burner control knobsInstall the condiment basket Secure side burnerMCAUTION Make sure both locks have snapped into place Install the accessory rack Complete accessory installationLighting To ExtinguishManual Lighting Lighting the side burner Lighting only the side burner. FigureAfter a Period of Nonuse Periodic CleaningCooking Drippings and greaseAnnual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsWeber Spider Stopper Guards General MaintenanceMCAUTION Do not enlarge the burner ports when cleaning Main Burner Flame PatternTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations Burner does not light, or flame is low in High position MCAUTION Do not line the bottom tray with aluminum foilSide Burner Troubleshooting Side Burner Maintenance16, 17 18 46-50 51-52,50 Parts List Final Word of Thanks