Weber 5000 owner manual Insert Flavorizer Bars Steam-N-Chips Smoker

Page 24

Check:

a)Hose to manifold connection. Figure 36 (a).

b)Manifold to side burner hose connection. Figure 36 (b).

WARNING: If there is a leak at connections a or b, retighten the fitting with a wrench and recheck for leaks with soap and water solution.

If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE.

Contact Weber-Stephen Customer Service.

c)Side burner hose to side burner connection. Figure 36 (c).

d)Valves to manifold connections. Figure 36 (d).

e)Hose to quick disconnect connection. Figure 36 (e).

WARNING: If there is a leak at connections c, d or e, turn OFF the gas. DO NOT OPERATE THE

BARBECUE. Contact Weber-Stephen Customer Service.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(a)(b)

(c)

(d)

Figure 36

(e)

Step 24

Insert Flavorizer Bars and

Steam-N-Chips Smoker

You will need: five long Flavorizer Bars, seven short Flavorizer Bars, Steam-N-Chips Smoker body and flue.

Place the three long Flavorizer Bars in the rear of the cooking box. Insert the remaining two bars through the Steam-N-Chips Smoker flue and set into place in the cooking box. Figure 37.

Figure 37

Place the short Flavorizer Bars in place in the upper positions in the cooking box. Set the Steam-N-Chips Smoker body on the flue and across the long Flavorizer Bars. Figure 38.

Figure 38

24

Image 24
Contents Genesis 5000 Series LP GAS Units only Warranty Patents and Trademarks Contents For Installation in Canada Gas supply testingGeneral Instructions StorageAssembly Check package contentsStep Page Page Check contents of hardware packs Assemble wheels Assemble frameContinue frame assembly Complete frame assemblyCheck the frame assembly Install left end panelInsert casters Install the three back panels Install side burner locksAdd cooking box Install gas supply General Specifications for PipingTypical natural gas supply installation. Figure Gas line pipingInstall side burner Check that all burner valves are offConnect flexible hose to manifold Install manifold bracket Install brace panelInstall right end panel Install bottom accessory trays Install igniterInstall left hand swing table Install right hand swing table Hinge rod View from rear of barbecue Check for gas leaks BARBECUE. Contact Weber-Stephen Customer Service Insert Flavorizer Bars Steam-N-Chips SmokerInstall cooking grates Install the bottom trayInstall the lid Install glass doors Secure the side burnerComplete accessory installation Lighting To ExtinguishSide burner will only operate when the Front burner is lit Manual LightingLighting the side burner Or deathPeriodic Cleaning CookingStorage and/or Nonuse Drippings and greaseUsing the Steam-N-Chips Smoker To use the Steam-N-Chips SmokerAnnual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsGeneral Maintenance Main Burner Cleaning ProcedureWeber Spider Stopper Guards Main Burner Flame PatternView from behind cooking box Thumb screws Crossover Ignition System Operations FlameCheck Safety System Burner does not light, or flame is low in High position Experiencing flare-upsSide Burner Troubleshooting Side Burner MaintenanceProblem Check Cure Side burner does not light Flame is low in High positionPage Page 19-20 22-24 68-71 Parts List Final Word Thanks
Related manuals
Manual 48 pages 899 b