Step 31
Complete accessory installation
You will need: work table, serving tray,
Insert one end of the Weber
Set the work table onto the left side rails. Figure 47 (b).
Place porcelain serving tray on the work table. Figure 47 (c).
Set the warming rack into the slots at the rear of the cooking box. Figure 47 (d).
Insert the thermometer into its holder. Figure 47 (e).
Insert tubing plugs into the ends of the frame. To fully seat the plugs, you may have to tap them lightly with a hammer. Figure 47 (f).
(a)
(e)
(c)
(b)
(d)
(f)
Figure 47
CAUTION: To keep the barbecue stationary, the tabs on the locking casters should be in the down position.
28