Step 4
Install leg braces (item #7) with support flange towards center of grill onto the legs using eight M6 x 12mm Phillips head bolts. Do not tighten bolts until Step 6 is completed.
NOTE: Leg brace with two holes for grease cup holder must be mounted on right side of grill legs.
Step 5
Install firebox support bracket (item #8) onto the holes on the left legs using two M6 x 12mm Phillips head bolts. Do not tighten bolts until Step 6 is completed.
Step 6
Install grill base (item #9) with firebox opening towards left side on top of the legs using four M6 x 12mm Phillips head bolts. Install two M6 x 12mm Phillips head bolts and M6 nuts thru grill base (item #9) and leg braces (item #7).
NOTE: Now tighten all screws in Steps 1 thru Step 6.
6