Brinkmann Heavy-Duty Natural Gas Grill Attach hose heat shield using two #8 self-tapping screws

Step 10

Attach side burner to right side of cart frame assembly. Insert two

M6 X 12mm bolts (black) into both right legs halfway. Place side burner over bolts and slide toward back of grill, then tighten securely. Fasten side burner front panel to grill body with one M6 X 12mm bolt (black).

Step 11

Attach hose heat shield using two #8 self-tapping screws.

Step 12

Loosen the two M4 bolts with washers from the bottom of the burner assembly bracket. This will allow the burner to move freely while performing Step 13.

Step 13

Heat Shield

Burner Venturi

Support Bracket

Remove two M4 bolts and washers from the side burner valve. Insert the side burner valve assembly through the hole in the side burner front panel, seat the valve nozzle into the burner venturi. Hold in place while you perform Step 14.

Warning: Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures.

25

Side Burner

Valve

Burner Venturi

Valve

Nozzle