Brinkmann 200, 400, 600, 500, 300, 100 owner manual Right Side Table Assembly M5 X 12 mm Silver Bolt

Figure 1 Figure 2

Right Side Table Assembly

M5 X 12 mm

Figure 3

Silver Bolt

Figure 1

Hole

Sear Burner Valve

Figure 2

Sear Burner Knob

Bezel

Pin on Bottom

Step 12

To attach the right side table assembly, first insert the side table’s fixed stands onto the grill body hooks (Figure 1).

Open the grill hood, then use one M5 X 12 mm bolts (black) and one M6 washer to secure the right side table assembly to the grill body from the inside (Figure 2).

Use two M6 X 12 mm (black) bolts and one M6 X 12 mm (silver) bolt to secure the side table base (Figure 3).

Step 13

Remove the two M4 X 10 mm bolts and spring washers from the sear burner valve.

Insert the sear burner valve assembly through the hole in the side burner table base (Figure 1).

Place the bezel over the control knob mounting stem and position over holes in side burner table base and sear burner valve assembly. Attach with two M4 X 10 mm, bolts that came with valve.

Then install the sear burner knob onto valve stem (Figure 2).

26