Brinkmann 600, 400, 500, 200, 300, 100 owner manual Hose & Regulator Specifications and Installation

Page 7

LP GAS CYLINDER (TANK) RUBBER SEAL INSPECTION:

Inspect the propane tank valve rubber seal for cracks, wear or deterioration prior to use. A damaged rubber seal can cause a gas leak, possibly resulting in an explosion, fi re or severe bodily harm.

Inspection should be done each time the propane tank is connected to the grill, has been refilled, exchanged or has not been used for more than 60 days.

Do not use a propane tank with a damaged rubber seal. Exchange the tank or have the rubber seal replaced at a qualified propane filling station.

Good

Damaged

Rubber Seal

Rubber Seal

INSTALLING THE LP GAS CYLINDER (TANK) ONTO THE GRILL:

1.Check that the cylinder valve is closed by turning the knob clockwise. Inspect cylinder valve rubber seal for cracks or deterioration. Do not use propane tank with damaged seal as a gas leak may occur.

2.Place the cylinder into the tank holder in the bottom of cabinet.

3.Orient the cylinder such that the valve opening faces the right side of the grill, and the hose is not kinked or damaged.

Tank Holder

HOSE & REGULATOR SPECIFICATIONS AND INSTALLATION:

WARNING

DO NOT attempt to connect grill, as purchased for LP (propane) gas, to any other fuel supply source such as a natural gas line.

DO NOT use any other pressure regulator/hose assembly other than the one supplied with your grill. Replacement pressure regulator/hose assembly must be part No 155-4580-0, which can be obtained by contacting customer service at 800-272-4443.

DO NOT attempt to adjust or repair a regulator. The regulator is designed to operate at a maximum output pressure of 11 inches of water column (2.74 kPa).

Ensure the tank valve is CLOSED prior to connecting the LP gas cylinder to your grill. Turn the valve knob clockwise to properly close the valve. Read and follow all instructions and warnings on the supply hose safety tags. Read and follow all warnings in this manual concerning the safe use of LP gas cylinders and the hose and regulator before connecting cylinder to grill. Read and follow all warnings on the LP cylinder.

6

Image 7
Contents Heavy-Duty Gas Grill Parrilla de Gas de Alta Resistencia Important Safety Table of Contents General Warnings LP GAS Cylinder Tank Specifications and Installation Filling the LP GAS Cylinder Tank LP GAS Cylinder Tank SpecificationsInstalling the LP GAS Cylinder Tank Onto the Grill Hose & Regulator Specifications and InstallationLP GAS Cylinder Tank Rubber Seal Inspection Hose and Regulator Leak TestingConnecting Hose and Regulator Regulator Resetting ProcedureChecking for Leaks When to Perform a Leak TestLighting Instructions PRE-START Check ListLighting the Main Burners Lighting the Sear Burner Match Lighting the Main BurnersMatch Lighting the Sear Burner Operating the Grill Sear Burner Using Other Features of the GrillRotisserie Cooking Turning OFF the GrillProper Care & Maintenance Burner ASSEMBLY/MAINTENANCE Transporting and Storage Burner AdjustmentBefore Storing Your Grill To see trouble shooting or assembly videos, visit us at Trouble ShootingHelpful Hints CleanlinessGrilling to Proper Temperature Grill Cooking TipsParts BAG Contains Assembly InstructionsThis grill is designed with Dual Fuel Valves to easily 2526 2728 Step Bolt Washer Spring Tank Gauge Bracket Step M6 X 30 mm M6 X 12 mm Upper Cart Base Grill Body Assembly Right Side Table Assembly M5 X 12 mm Silver Bolt LED Battery Step Step Grease Cup Warranty