Brinkmann 100, 400, 600, 500, 200, 300 LP GAS Cylinder Tank Specifications and Installation

Page 5

Grill is hot when in use. To avoid burns:

DO NOT attempt to move the grill.

Block the wheels so the unit does not accidentally move.

Wear protective gloves or oven mitts.

DO NOT touch any hot grill surfaces.

DO NOT wear loose clothing or allow hair to come in contact with grill.

Not for commercial use. DO NOT use this grill for anything other than its intended purpose.

USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS GRILL.

FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS MANUAL

COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

LP GAS CYLINDER (TANK) SPECIFICATIONS AND INSTALLATION:

WARNING

ONLY connect this grill to a Type 1 cylinder valve. The Type 1 valve can be identified with the large external threads on the valve outlet.

DO NOT connect to a propane cylinder exceeding a 20 lb. (9.1 kg) capacity.

DO NOT connect to a cylinder that uses any other type of valve connection device.

Inspect the propane tank valve rubber seal for cracks, wear or deterioration prior to use. A damaged rubber seal can cause a gas leak, possibly resulting in an explosion, fire or severe bodily harm.

Turn off the cylinder valve when your grill is not in use.

Handle the tank with care.

Always secure the cylinder in an upright position.

Never connect an unregulated LP gas cylinder to your grill.

DO NOT expose LP gas cylinders to excessive heat or ignition sources.

DO NOT store a spare LP gas cylinder under or near your grill.

Allow only qualified LP gas dealers to fill or repair your LP gas cylinder.

DO NOT allow the cylinder to be filled beyond 80% capacity.

Read and follow all warnings and instructions that are on the cylinder and that accompany this product.

DANGER

DO NOT store a spare LP gas cylinder (full or empty) under or near your grill. This could cause excess pressure to be expelled through the vapor relief valve resulting in fire, explosion, or severe personal injury, including death.

Propane gas is heavier than air and will collect in low areas. Proper ventilation is extremely important. Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from obstructions and debris.

DO NOT insert any foreign objects into the cylinder valve outlet as this could damage the rubber seal. Do not use propane tank with a damaged rubber seal. A damaged rubber seal can cause a gas leak, possibly resulting in explosion, fire, severe bodily harm, or death. Inspect rubber seal for cracks, wear or deterioration prior to use.

Always keep cylinder (tank) in upright position during use, transit or storage.

4

Image 5
Contents Heavy-Duty Gas Grill Parrilla de Gas de Alta Resistencia Important Safety Table of Contents General Warnings LP GAS Cylinder Tank Specifications and Installation Filling the LP GAS Cylinder Tank LP GAS Cylinder Tank SpecificationsLP GAS Cylinder Tank Rubber Seal Inspection Hose & Regulator Specifications and InstallationInstalling the LP GAS Cylinder Tank Onto the Grill Connecting Hose and Regulator Leak TestingRegulator Resetting Procedure Hose and RegulatorChecking for Leaks When to Perform a Leak TestLighting the Main Burners PRE-START Check ListLighting Instructions Match Lighting the Sear Burner Match Lighting the Main BurnersLighting the Sear Burner Operating the Grill Rotisserie Cooking Using Other Features of the GrillTurning OFF the Grill Sear BurnerProper Care & Maintenance Burner ASSEMBLY/MAINTENANCE Before Storing Your Grill Burner AdjustmentTransporting and Storage To see trouble shooting or assembly videos, visit us at Trouble ShootingGrilling to Proper Temperature CleanlinessGrill Cooking Tips Helpful HintsParts BAG Contains Assembly InstructionsThis grill is designed with Dual Fuel Valves to easily 2526 2728 Step Bolt Washer Spring Tank Gauge Bracket Step M6 X 30 mm M6 X 12 mm Upper Cart Base Grill Body Assembly Right Side Table Assembly M5 X 12 mm Silver Bolt LED Battery Step Step Grease Cup Warranty