Model NGA 2000 TO2
Instruction Manual
3-5 EXPERT CONTROLS AND SETUP
The Expert Controls and Setup menus pro- vide for the configuration of system and net- work I/O (SIO & DIO), and for the
| TO2 |
|
|
|
|
|
| 37.50 ppm | ||||
|
|
|
|
|
|
|
|
| ||||
|
| Analyzer basic controls (calibration) & setup… |
|
|
| |||||||
|
|
|
|
|
| |||||||
|
| Analyzer and I/O, expert controls & setup… |
|
|
| |||||||
|
| System configuration and diagnostics… |
|
|
|
| ||||||
|
| Display controls… |
|
|
|
|
|
|
|
| ||
|
| Time & Date: |
| 06:34:05 February 01 2000 | ||||||||
|
| System tag: |
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Measure |
| Status… |
| Channel |
|
| Lock… |
| MFG Data | |
configuration of various functions on the TO2 analyzer module: To reach the analyzer setup and controls menu , use the following se- quence from the main menu:
From the Main menu, move the cursor to the “Analyzer and I/O, expert controls & setup…” line and press the ↵ key. The menu will dis- play as shown below.
TO2 | 37.50 ppm |
Analyzer module controls…
System & network I/O module controls….
Analyzer module setup…
System & network I/O module setup…
(Note: Controls & setup are identical for MLT/FID)
Measure |
| Channel |
| Back… |
|
Select the “Analyzer module control…” line and press the ↵ key. The “Analyzer Module Setup and Controls” menu will display as shown.
Note: Both the “Analyzer Module Controls…” and “Analyzer Module Setup…” lines activate the “Analyzer Module Setup and Controls” menu.
TO2 |
|
|
|
| 37.50 ppm |
| |
|
|
| |||||
|
|
|
|
|
|
|
|
| Calibration… |
|
|
| |||
| Alarms… |
|
|
|
|
|
|
| Ranges… |
|
|
|
|
|
|
| Linearization… |
|
|
| |||
| Measurement display configuration… |
|
|
| |||
| Concentration measurement… |
|
|
| |||
| Flow measurement… |
|
|
| |||
| Temperature requirements… |
|
|
| |||
|
|
|
|
|
|
|
|
| Measure |
| Status… |
| Back… |
|
|
Note: Whenever the “Channel” tag appears above the F3 key, pressing F3 will switch to any other installed analyzer modules, one after the other and eventually back to the TO2 module. When activating any other in- stalled module, the menus will be different depending on that module. See each mod- ule’s manual for a description of those menus.
Figure 3-15. Expert Controls and Setup
Rosemount Analytical Inc. A Division of Emerson Process Management | Operation |