Omron Healthcare HEM-907 instruction manual Requests from Omron

Page 10

Notes on Safety

Caution

Be sure to use the power supply of 230 VAC.

It may cause re or electric shock.

Do not share an electric outlet with other unit or electric appliance.

It may cause re or electric leak.

Do not pull the power cord when pulling out the AC adapter from the electric outlet.

The power cord will be disconnected or shorted and may cause re or electric shock.

Do not install or store the unit where it may be sprayed with water or medication.

You may suffer electric shock.

Requests from OMRON

Do not place or put anything on the unit.

Do not apply strong shock to or drop the unit.

When you move the unit, be sure to turn off the power and remove the connected AC adapter.

When using this unit concurrently with other unit, be sure to read the Instruction Manual of the other unit to be used concurrently and understand the warnings and cautions before use.

Be sure to con rm that all cords and tubes are co nnected correctly and completely before use.

Inspect the Buttons and so on to con rm that the unit operates normally before use.

When using a battery pack, be sure to con rm that the voltage is suf cient before use. If you are not going to use the unit for a long period of time, remove the battery pack.

Do not in ate the arm cuff without being wrapped over the arm.

Do not use a damaged arm cuff.

Do not use the unit in a vehicle.

Be sure to monitor all the time that the unit and the patient are not abnormal.

Please keep the unit out of the reach of patient.

Clean and store the unit and accessories after each use.

Do not clean the unit with gasoline, thinner, or high concentration alcohol.

Do not disinfect the unit by autoclave or gas sterilization (EOG, formaldehyde, or high concentration ozone.)

Do not store the unit in the following places.

·Under the direct sunshine

·Dusty or salty environment

·Places which slope, vibrate, and/or are prone to shocks

·Storage of chemicals or where gas may be generated

·Under high temperature and high humidity

10

Image 10
Contents Table of Contents HEM-907Intended Use Exemptions Names and Functions of the Parts DC8VNumber of irregular pulse waves Example of displayNon-display function Hide Pressure setting function P-SETManual de ation control function List of Functions for each Mode Setting mode change functionProcedure to change the set values Items to set Set valueContents Examples of signsWhen an error is generated or the measured value is doubtful Requests from Omron Durability MaintenanceMeasures to take at the time of trouble or accident Components of the Product OptionsSecurely connect the air tube Prepare the patient to be ready to wrap the arm cuffHow to Apply the Arm Cuff Adjust the level of the arm cuff to the level of the heartHow to Measure Blood Pressure List of Measurement ModesPush the Start Button to start the measurement How to Measure Blood Pressure in Single ModeSet the Mode Selector to Measured results are dis- playedWrap the arm cuff over the patient’s arm Push the Stop ButtonPush the Start Button Measured results are displayedHow to Measure Blood Pressure in MANU. Mode How to use the blood pressure monitor How to Measure Blood Pressure in Check ModeCheck result Battery low Installation and Replacement of Battery PackBattery life Charging timeHow to Clean the Unit after Use List of Error Codes Error code Cause How to correctTroubleshooting Problem What to inspect How to correctSpeci cations HEM-907-E / HEM-907-E7Omron Healthcare Europe B.V EMC & Weee