Names and Functions of the Parts
(4) Setting mode change function
You can set the number of times to measure, the waiting time until the start of measurement, and the interval between measurements.
| Items to set | Set value |
F1 | Number of measurements | 2 times, 3 times |
F2 | Waiting time until the start of measurement | 0 sec, 3 min, 5 min, 10 min. |
F3 | Measurement interval time | 5 sec, 30 sec, 1 min, 2 min, 3 min. |
Procedure to change the set values
1)When the power is off, press the ON/OFF Button for more than three seconds while holding the START Button and change the mode to the Setting Change Mode.
2)Press the START Button to select the item from F1 to F3.
3)Press the DEFLATION Button to change the set values.
ON/OFF
START
HIDE
|
|
| DEFL ATION |
| AVG./1s t/2nd/3rd | ||
MODE | |||
140 | 180 | SINGLE | |
| AVG. | MANU. | |
100 | 220 | CHECK | |
STOP
| 260 |
AUTO | 280 |
List of Functions for each Mode
Measurement | Single measure- | Average | Auscultation | Check | |||
Mode | ment (SINGLE) | (AVG.) | (MANU.) | (CHECK) | |||
Function | |||||||
|
|
|
|
|
| ||
Pressure setting |
|
|
|
|
|
| |
function |
|
|
|
|
|
| |
|
|
|
|
|
| ||
function
Manual de ation control function
Setting mode
change function
7