Single DensityTM Cushion
Assembly, Installation and Operating Instructions
SAFETY SUMMARY
The following recommendations are made for the safe use of the Single Density Cushion:
WARNING
DO NOT use this equipment without first read- ing and understanding these instructions. If you are unable to understand the Warnings, Cautions, and Instructions, contact distribu- tor before attempting to use this equipment, otherwise, injury or damage may result.
Check all parts for shipping damage and test before use. In case of damage, DO NOT use. Contact the distributor for futher instructions.
The Single Density Cushion IS NOT designed for use in the treatment of pressure sores or by individuals at risk of developing pressure sores.
Your therapist and physician should be con- sulted if you have any questions regarding weight relief,
The information contained in this docu- ment is subject to change without notice.
Make sure the hook and loop fastening straps are securely attached between the seating surface and cushion before using.
2.If the wheelchair has loop attachment strips, verify that the double sided hook strips are securely at- tached to the loop attachment strips on the bottom of the cushion.
NOTE: The zipper on the cushion should face rearward.
3.Align the front edge of the cushion with the front edge of the seating surface.
4.Secure the cushion to the seating surface, making sure that the double sided hook is securely attached to the strips of loop on the cushion cover and the chair.
WARNING
Make sure the hook and loop fastening straps are securely attached between the seating sur- face and cushion before using. If the cushion is not secured to the wheelchair seating surface, exercise caution when transferring in and out of the wheelchair.
5.If the wheelchair has hook attachment strips, remove the double sided hook strips from the cushion.
6.Align the front edge of the cushion with the front edge of the seating surface.
7.Secure the cushion to the seating surface, making sure that the strips of loop on the cushion cover are securely attached to the strips of hook on the chair.
INTRODUCTION
Zipper Faces Rearward Cushion
The Single Density Cushion is designed to provide both pelvic stability and comfort for the user. The cover is made from a water repellant fabric to protect the foam.
ATTACHING THE CUSHION TO THE SEATING SURFACE (FIGURE 1)
The cushion attaches to the wheelchair seating sur- face using hook and loop fastening straps.
Cushion Cover
The bottom of the cushion cover is equipped with two
(2) strips of the loop portion of the fastening strap.
Attached to the loop portion are two(2) strips of double- sided hook.
Loop | Portion of |
| Front Of | |||
Fastening Strap |
| |||||
| Cushion | |||||
(Attached |
| To |
| |||
|
| Lines Up | ||||
Cushion) |
|
| ||||
| With The | |||||
|
|
|
|
|
| |
|
|
|
|
|
| Front Of |
Double |
| Sided |
| The | ||
Hook | Portion of | Seating | ||||
Fastening |
| Strap | Surface | |||
|
|
|
| Seating Surface |
|
Wheelchair Seating Surface | FIGURE 1 - ATTACHING THE CUSHION TO |
1. Determine whether the wheelchair seating surface | |
has hook or loop attachment strips. | THE SEATING SURFACE |
|
1