1.Depress the snap buttons on the front leg extensions (with wheels) of the walker and slide the leg extensions up or down to the desired height. Ensure that the snap button protrudes through the appropri- ate adjustment hole on the leg extension (FIGURE 3).
| NOTE: Back rest not | ||
Adjustment | shown | for | clarity. |
|
|
| |
Hole |
|
|
|
Snap Button |
|
|
|
|
|
| Leg Extensions |
| Leg Extension |
| (with wheels) |
| (with glide brake) |
|
FIGURE 3 - INSTALLING/ADJUSTING LEG EXTENSIONS
2.Repeat STEP 1 for the rear leg extensions (with glide brakes).
3.Ensure all four (4) legs are adjusted so that the walker is level.
WARNING
The leg extensions should be adjusted so the walker is level. If an even height cannot be achieved, adjust the leg extensions so that the rear of the walker is no more than one (1) inch (2.5cm) lower than the front.
7