Invacare 1143206 manual General Guidelines

Page 12

SECTION 1—GENERAL GUIDELINES

DO NOT engage or disengage the motor release levers until the power is in the Off position.

DO NOT operate on roads, streets or highways.

DO NOT climb, go up or down ramps or traverse slopes greater than 7°.

DO NOT attempt to move up or down an incline with a water, ice or oil film.

DO NOT attempt to drive over curbs or obstacles. Doing so may cause your wheelchair to turn over and cause bodily harm or damage to the chair.

DO NOT leave the power button in the On position when entering or exiting your wheelchair.

DO NOT stand on the frame of the wheelchair.

Limited Clearance Between Footboard and Caster ‐ The user’s feet MUST remain centered on the footboard, away from the footboard sides, while operating the wheelchair. If the user’s feet are allowed to rest off the side of the footboard they may come in contact with the caster possibly resulting in injury.

DO NOT stand on the flip‐up footboard, otherwise damage may occur. When getting in or out of the wheelchair, make sure that the flip‐up footboard is in the upward position.

DO NOT stand on the front riggings, otherwise damage may occur. When getting in or out of the wheelchair, make sure that the footplates on the front riggings are in the upward position or moved out of the way.

ALWAYS wear your seat positioning strap. The seat positioning strap is a positioning belt only. It is not designed for use as a safety device withstanding high stress loads such as auto or aircraft safety belts. If signs of wear appear, belt MUST be replaced immediately.

Make sure the detent balls of the quick‐release pin are fully released beyond the outer edge of the tube before operating the wheelchair. Otherwise, injury and/or damage may result.

Keep detent balls clean.

Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.

Avoid storing or using the wheelchair near open flame or combustible products. Serious injury or damage to property may result.

Pronto® M41 with SureStep®

12

Part No. 1143206

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Pronto M41 With SureStep Accessories Warning Reference DocumentsTable of Contents Arms Batteries Special Notes MeaningSpecial Notes Label Location Positive +Typical Product Parameters FOLD-DOWNTypical Product Parameters FOLD-DOWN Controller Settings/Repair or Service Accessories InformationGeneral Guidelines Operation InformationGeneral Guidelines Batteries Charging BatteriesWeight Training Weight LimitationGrounding Instructions Rain TestEMI Information EMI Information Initial Setup Setup ChecklistSAFETY/HANDLING of Wheelchairs Stability and BalanceCoping With Everyday Obstacles Coping With Everyday ObstaclesPinch Points Lifting/StairwaysLifting/Stairways Transferring To and From Other Seats Transferring To and From Other SeatsReaching, Leaning and Bending Forward Reaching and Bending BackwardSafety Inspection Safety Inspection ChecklistsInspect/Adjust Initially Inspect/Adjust Weekly Inspect/Adjust MonthlyTroubleshooting Guide Inspect/Adjust PeriodicallyAll Wheelchairs Troubleshooting Electrical SPJ+ JoysticksInformation Gauge Display Diagnostics Turning the Power On/Off Wheelchair OperationUsing the Joystick to Drive the Wheelchair Movement ActionMK5 SPJ-INT Joystick Switches and Indicators On/Off ButtonSpeedometer Speed Control Buttons JoystickCharger/Programming Input Service Indicator Information Gauge DisplayRemoving/Installing the Arms ArmsAdjusting the Arms Adjusting WidthAdjusting Angle Adjusting Height Semi-Recline Seats Only Adjusting Depth Fold Down Back Seats OnlyRemoving/Installing the Seat Assembly InstallingSeat RemovingAdjusting the Back Angle Semi-Recline Back Adjusting the HeadrestReplacing the Seat Positioning Strap Back seat shownFootboard Assembly Removing/Installing the Footboard AssemblyAdjusting the Footboard Assembly AngleAdjusting the Footboard Assembly Depth DepthAdjusting the Footboard Assembly Height HeightInstalling/Removing Front Riggings Front RiggingsAdjusting Footrest Height Model PHWH93Replacing Heel Loops Model PH904A and PHAL4AAdjusting/Replacing Telescoping Front Rigging Supports Raising/Lowering Elevating Front RiggingsFront Rigging Removing/Installing the Top Shroud Shroud and WheelsReplacing the Flat Free Tires on the Wheel Rim Removing/Installing the Rear Shroud Removing/Installing Casters Engaging/Disengaging Motor Release LeverAdjusting Forks Removing/Installing CastersRemoving/Installing Forks and/or Caster Assemblies Adjusting Anti-Dive SpringsRemoving/Installing the Joystick Assembly ElectronicsRemoving/Installing the Joystick Assembly Repositioning the JoystickDisconnecting/Connecting the Joystick Disconnecting the JoystickConnecting the Joystick Disconnecting/Connecting the Joystick Using the Proper Batteries BatteriesRemoving/Installing the Batteries Removing/Installing the Batteries Connecting/Disconnecting Battery Cables Connecting Battery CablesTerminal CapNOTE Handles on batteries removed for clarity Disconnecting Battery Cables Charging BatteriesBattery Charger Operation Battery Charger Operation Accessories Installing/Removing the Crutch/Cane HolderInstalling/Removing the Oxygen Holder Installing/Removing/Using the Walker Holder Installing/Removing the Walker HolderUsing the Walker Holder Installing/Removing/Using the Walker HolderPronto M41 with SureStep Global Limited Warranty Excluding Canada Canada Limited Warranty USA

1143206 specifications

The Invacare 1143206 is a highly regarded mobility product recognized for its robust design and advanced features, specifically tailored to enhance user comfort and mobility. This wheelchair is engineered with both user needs and caregiver requirements in mind, ensuring an optimal blend of functionality, durability, and ease of use.

One of the standout features of the Invacare 1143206 is its adjustable seating system. This innovative design allows users to customize the seating position according to their individual needs. The seat height can be adjusted easily, accommodating a variety of users and enhancing accessibility for those with different heights. The backrest is also adjustable, providing additional support for the user, which is essential for long-term comfort.

The wheelchair is constructed from high-quality materials to ensure longevity and reliability. The frame is made from sturdy steel, which not only supports the user effectively but also contributes to the overall stability of the chair. The innovative design minimizes the risk of tipping and enhances safety, particularly when navigating uneven surfaces.

Invacare has integrated several technologies to enhance the user experience, including advanced wheel and tire designs that offer superior grip and maneuverability. The footrests are swing-away and adjustable, allowing users to enter and exit the chair with ease.

Another important characteristic of the Invacare 1143206 is its lightweight structure. While the frame is sturdy, it is also designed to be easily transportable. This makes it ideal for users who may need to load it into vehicles or transport it for outings, as caregivers can do so without significant effort.

Safety is paramount in the engineering of the Invacare 1143206. The wheelchair features reliable brakes and locking mechanisms that allow for secure positioning during use. Additionally, the wheels are designed to prevent accidental rolling, making it a safe choice for both users and caregivers.

In summary, the Invacare 1143206 is a thoughtfully designed wheelchair that encompasses a range of essential features and technologies. Its adjustable seating system, lightweight structure, ergonomic design, and safety features collectively make it a preferred choice for users seeking comfort and mobility solutions. Whether for daily use or occasional outings, this wheelchair stands out as a dependable and versatile option.
Top Page Image Contents