Invacare 1143206 manual Removing/Installing the Seat Assembly

Page 37

SECTION 8—SEAT

SECTION 8—SEAT

WARNING

After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.

Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.

Removing/Installing the Seat Assembly

NOTE: For this procedure, refer to FIGURE 8.1.

Removing

1.Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 56.

2.Fold down the seat back.

3.Pull the seat lever up and lift the seat assembly up and away from the seat post.

Installing

1.Align the seat pivot with the seat post

2.Pull the seat lever up and lower the seat assembly on the seat post.

NOTE: If necessary, slightly twist seat assembly back and forth to lock it in place.

3.Release the seat lever.

4.Pull the seat assembly up to ensure that it is locked in place.

5.Connect the joystick. Refer to Disconnecting/Connecting the Joystick on page 56.

	Seat Back	Seat
	Seat Back	Assembly
		Assembly

	Seat
	Lever	Seat Pivot
	Seat	Seat Pivot
	Seat	(hidden
	Post	from view)

FIGURE 8.1 Removing/Installing the Seat

Assembly

Part No. 1143206

37

Pronto® M41 with SureStep®

Image 37

Contents Pronto M41 With SureStep Reference Documents Accessories WarningTable of Contents Arms Batteries Meaning Special NotesSpecial Notes Positive + Label LocationFOLD-DOWN Typical Product ParametersTypical Product Parameters FOLD-DOWN Accessories Information Controller Settings/Repair or ServiceGeneral Guidelines Operation InformationGeneral Guidelines Charging Batteries BatteriesWeight Limitation Weight TrainingGrounding Instructions Rain TestEMI Information EMI Information Setup Checklist Initial SetupStability and Balance SAFETY/HANDLING of WheelchairsCoping With Everyday Obstacles Coping With Everyday ObstaclesLifting/Stairways Pinch PointsLifting/Stairways Transferring To and From Other Seats Transferring To and From Other SeatsReaching and Bending Backward Reaching, Leaning and Bending ForwardSafety Inspection Checklists Safety InspectionInspect/Adjust Initially Inspect/Adjust Monthly Inspect/Adjust WeeklyInspect/Adjust Periodically Troubleshooting GuideAll Wheelchairs SPJ+ Joysticks Troubleshooting ElectricalInformation Gauge Display Diagnostics Wheelchair Operation Turning the Power On/OffMovement Action Using the Joystick to Drive the WheelchairOn/Off Button MK5 SPJ-INT Joystick Switches and IndicatorsSpeedometer Joystick Speed Control ButtonsCharger/Programming Input Information Gauge Display Service Indicator Arms Removing/Installing the ArmsAdjusting Width Adjusting the ArmsAdjusting Angle Adjusting Depth Fold Down Back Seats Only Adjusting Height Semi-Recline Seats OnlyInstalling Removing/Installing the Seat AssemblySeat RemovingAdjusting the Headrest Adjusting the Back Angle Semi-Recline BackBack seat shown Replacing the Seat Positioning StrapRemoving/Installing the Footboard Assembly Footboard AssemblyAngle Adjusting the Footboard AssemblyDepth Adjusting the Footboard Assembly DepthHeight Adjusting the Footboard Assembly HeightFront Riggings Installing/Removing Front RiggingsModel PHWH93 Adjusting Footrest HeightModel PH904A and PHAL4A Replacing Heel LoopsRaising/Lowering Elevating Front Riggings Adjusting/Replacing Telescoping Front Rigging SupportsFront Rigging Shroud and Wheels Removing/Installing the Top ShroudReplacing the Flat Free Tires on the Wheel Rim Removing/Installing the Rear Shroud Engaging/Disengaging Motor Release Lever Removing/Installing CastersRemoving/Installing Casters Adjusting ForksAdjusting Anti-Dive Springs Removing/Installing Forks and/or Caster AssembliesElectronics Removing/Installing the Joystick AssemblyRepositioning the Joystick Removing/Installing the Joystick AssemblyDisconnecting the Joystick Disconnecting/Connecting the JoystickConnecting the Joystick Disconnecting/Connecting the Joystick Batteries Using the Proper BatteriesRemoving/Installing the Batteries Removing/Installing the Batteries Connecting Battery Cables Connecting/Disconnecting Battery CablesTerminal CapNOTE Handles on batteries removed for clarity Charging Batteries Disconnecting Battery CablesBattery Charger Operation Battery Charger Operation Installing/Removing the Crutch/Cane Holder AccessoriesInstalling/Removing the Oxygen Holder Installing/Removing the Walker Holder Installing/Removing/Using the Walker HolderInstalling/Removing/Using the Walker Holder Using the Walker HolderPronto M41 with SureStep Global Limited Warranty Excluding Canada USA Canada Limited Warranty