SECTION
5.Disconnect the left battery from the right battery (RED and BLACK connectors).
6.Lift left and right battery out of the battery tray using the battery handles.
Installing
1.Verify the joystick On/Off switch is in the Off position and disconnect joystick cable. Refer to Disconnecting/Connecting the Joystick on page 56.
2.Position the right battery in the battery tray.
3.Position left battery in the battery tray.
NOTE: Ensure that both batteries are properly seated and resting on the battery tray.
4.Connect the left battery to the right battery (RED and BLACK connectors).
5.Connect the right battery to the controller (BLACK connector).
6.Install the top shroud. Refer to Removing/Installing the Top Shroud on page 49.
7.Install the seat. Refer to Removing/Installing the Seat Assembly on page 37.
8.Connect the joystick cable. Refer to Disconnecting/Connecting the Joystick on page 56.
|
| Wiring Diagram | |
|
|
| U1 Batteries |
Seat | BLACK | Left | Right |
Connector to | Battery | Battery | |
Controller | |||
| |||
|
| ||
Shroud |
|
|
Plug Into
Controller
Batteries
Battery Tray
| BLACK |
RED Connectors | Connectors |
|
FIGURE 13.1 Removing/Installing the Batteries
Pronto® M41 with SureStep® | 60 | Part No. 1143206 |