Cisco Systems 2 guide

Step 9 Click Next. The Change Admin Password window appears:

a.Enter an admin password, conﬁrm, and click Next. The Change System Identity Account Password window appears

b.Enter a System Identity Account password (and conﬁrm), and click Next. The Create casuser dialog box appears.

c.Click Yes to continue with the installation.

Note If you selected the Custom installation mode, during this part of the installation you will be asked to enter the following information: guest password, causer password, Common Services database password, Web server information, and self-signed certificate information.

Step 10 The Summary window appears, displaying the current settings. Click Next. The installation proceeds.

Step 11 Click OK on additional messages if they are displayed:

If the system has more than one NIC and more than one IP address configured, you will see this message:

This machine is multihomed. Please update the MULTI-HOME properties section in C:\PROGRA~2\CSCOpx\lib\vbroker\gatekeeper.cfg after the installation is complete.

Caution Do not run Service Monitor on this system; uninstall Service Monitor and install it on another system that has only one NIC.

If Windows SNMP service is not installed on your system, you will see this message:

Windows SNMP service is not installed on your system. This installation will continue. To install support for system application and host resources MIBs, you must install the Windows SNMP service, using Add/Remove Programs from the Control Panel.

If you installed Service Monitor for evaluation only, you will see this message:

Please obtain a valid license key from CCO within 90 days.

You will see a dialog box with the following message displayed:

Before you reboot this system, configure automatic time synchronization on it using NTP. Configure this system to use the time server that is used by Cisco Unified CallManagers in your network.