Cisco Systems 2 quick start Starting Cisco Unified Service Monitor

MAC-Specific Configuration File—QOV001120FFCF18.CNF

In a MAC-specific configuration file, the default ID, A000, has been replaced by the sensor MAC address; the receiver DNS name is included, although an IP address could appear instead. The last updated date and time represent the last time that the configuration file was updated; this could be when the sensor registered with Service Monitor or when a user edited the configuration file from the Service Monitor user interface.

Receiver=qovr-weekly;;

ID=001120FFCF18

Image=SvcMonAA2_34.img

LastUpdated=11_13_2006-4_3_57.578

CDPGlobalRunState=true

SyslogPort=UDP:5666

SkinnyPort=TCP:2000

7Starting Cisco Unified Service Monitor

Step 1 In your browser, type http://servername:1741 where servername is the IP address or DNS name of the server where Service Monitor resides. A login page is displayed.

Step 2 Enter a username and password. If you do not have a username, you can do the following:

•Enter admin for the user ID.

•Enter the password that you entered for the admin user during installation and press Enter.

The Service Monitor home page appears.

8Uninstalling and Reinstalling Service Monitor

This section contains the following:

•Uninstalling Service Monitor

•Reinstalling Service Monitor

26