Multiquip FCG1-6HA manual General Safety, Diamond Blade Safety

Page 10

RULES FOR SAFE OPERATION

General Safety

■ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment.

■ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw.

■NEVER leave the machine unattended while running.

■Apply the brakes when leaving or when using on a slope.

■Maintain this equipment in a safe operating condition at all times.

■ALWAYS stop the engine before servicing, adding fuel and oil.

■NEVER run the engine without the air filter. Severe engine damage could occur.

■ALWAYS service air cleaner frequently to prevent carburetor malfunction.

■AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts, this can cause a serious injury.

■ALWAYS keep clear of rotating or moving parts while the saw is in operation.

■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

■ALWAYS keep the work area well organized.

■ALWAYS Clear the cutting area of any debris, tools, etc.that would constitute a hazard while the saw is in operation.

WARNING

ALWAYS check to make sure that the operating area is clear before starting the engine.

■No one other than the operator is to be in the working area when the saw is in operation.

■Always observe all applicable compulsory regulations relevant to environmental protection, especially, fuel storage, the handling of hazardous substances, and the wearing of protective clothing and equipment. Instruct the user as necessary, or, as the user, request this information and training.

Diamond Blade Safety

■Use appropriate steel centered diamond blades manufactured for use on concrete saws. See further blade information on pages 21 through 23.

WARNING

ALWAYS inspect diamond blades before each use. The blade should exhibit no cracks, dings, or flaws in the steel centered core and/or rim. Center (arbor) hole must be undamaged and true. All damaged blades must be discarded.

■Examine blade flanges for damage and excessive wear.

■Ensure the cleanliness of the blade before blade is installed. Blade should fit snugly on the shaft and against the inside/ outside blade flanges.

■Ensure the blade is marked with an operating speed greater than the spindle speed of the saw.

WARNING

Only cut the material that is specified for the diamond blade. Read the specifications of the diamond blade to ensure the proper tool has been matched to the material being cut. The saw has been engineered for DRY CUTTING. Ensure a DRY CUTTING blade is being used.

■ALWAYS keep blade guards in place. Exposure of the diamond blade must not exceed 180 degrees.

■Ensure that the diamond blade does not come into contact with the ground or surface during transportation. DO NOT drop the diamond blade on ground or surface.

■The engine governor is set to regulate maximum engine speed in a no-load condition. Do not tamper with the engine governor to increase the speed. Increasing the engine speed could allow the maximum rated spindle speed to be exceeded, creating an unsafe condition.

■Ensure that the blade is mounted for proper operating direction. (See Figure 12)

■Adhere to the Blade Manufacturer's recommendations on handling, storage, and safe usage of blades.

PAGE 10 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model FCG1-6HA Proposition 65 Warning SILICOSIS/RESPIRATORY Warnings Silicosis Warning Respiratory HazardsTable of Contents FCG16HA SlabSaver Concrete SawSpecifications FCG1 Concrete Saw SpecificationsDimensions SideView Front ViewSafety Message Alert Symbols Foryour Safety and the Safety of Others8 FCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 Rules for Safe Operation Rules for Safe OperationGeneral Safety Diamond Blade SafetySaw Transportation Safety Maintenance SafetyEmergencies General Information Intended UseFCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 Components FCG16HA Concrete SawBeltTension Adjuster Adjusts belt tension Basic Engine Engine Controls and ComponentsBelt Check GUARDS, Covers and V-BELTSNational Standards Institute Ansi B7.1 and B7.5 Belt Alignment and TensioningTo Tighten the V-belt To Remove and Replace the V-beltBlades Diamond BladeBlade Speed Blade PlacementDiamond Blades Cutting DepthBlade Removal and Replacement Diamond Blade PlacementCutting Depth Adjustment Raise/Lower AssemblyEngine Oil Check InspectionBefore Starting Blade CheckEngine Shutdown Switch OperationThrottle Lever Stopping the Engine Rotate the throttle lever toward full throttleRestarting After Intervention Maintenance Spark plug Engine tank & strainerFuel line Chassis LubricationTroubleshooting SAW Blade TroubleshootingTroubleshooting Engine Troubleshooting EngineTroubleshooting Engine FCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 Sample Parts List Explanation of Code in Remarks ColumnSuggested Spare Parts To 3 UnitsDecal Locator Decal LocatorPart Name Guards Assy Part Name QTY Remarks Guides Assy SCREW, HHC 3/8 16 X 3 Full Thrd Undercarriage Assy Part Name QTY Handle & Depth Adjuster Assy Frame Engine & Blade Drive Assy WASHER, Lock 5/16 MED Honda GX200QXC9 AIR Cleaner Cyclone Assy GASKET, Elbow Honda GX200QXC9 Camshaft Assy ROD, Push Honda GX200QXC9 Carburetor Assy Gasket SET Honda GX200QXC9 Control Assy ARM, Governor Honda GX200QXC9 Crankcase Cover Assy GASKET, OIL Filler CAP Honda GX200QXC9 Crankshaft Assy Crankshaft Q- Type Honda GX200QXC9 Cylinder Barrel Assy Switch ASSEMBLY, OIL Level Honda GX200QXC9 Cylinder Head Assy CLIP, Valve Guide Honda GX200QXC9 FAN Cover Assy COVER, FAN *R8* Bright RED Honda GX200QXC9 Flywheel Assy FAN, Cooling Honda GX200QXC9 Fuel Tank Assy RUBBER, Supporter 107MM Honda GX200QXC9 Ignition Coil Assy Coil ASSEMBLY, Ignition Honda GX200QXC9 Muffler Assy Muffler Honda GX200QXC9 Piston Assy Ring SET, Piston Standard Honda GX200QXC9 Recoil Starter Assy R8* Bright RED No Illustration Available Honda GX200QXC9 Gasket KIT AssyGASKET, Case Cover Honda GX200QXC9 Labels Assy Emblem Terms and Conditions of Sale Parts Freight PolicyFCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 HERE’S HOW to GET Help

FCG1-6HA specifications

The Multiquip FCG1-6HA is an advanced compact generator designed to meet the needs of contractors, event planners, and outdoor enthusiasts. This generator is known for its reliability, efficiency, and user-friendly features that make it an essential tool in various applications.

One of the standout features of the FCG1-6HA is its powerful Honda engine, which delivers robust performance while ensuring fuel efficiency. The engine operates quietly, making it ideal for noise-sensitive environments such as residential areas and outdoor events. With a strong output capacity, the generator provides a stable power supply for multiple devices and tools simultaneously.

The FCG1-6HA is equipped with advanced inverter technology, which produces clean and stable electricity. This feature is particularly important for sensitive electronics like laptops, smartphones, and medical equipment, ensuring they operate safely without the risk of damage from unstable power.

The generator's compact and lightweight design enhances its portability, allowing users to transport it easily to remote job sites or recreational areas. The durable frame construction ensures it can withstand tough conditions, making it an excellent choice for construction sites and outdoor adventures.

Another significant characteristic of the FCG1-6HA is its user-friendly control panel. The intuitive layout with easy-to-read indicators and straightforward controls simplifies operation for users of all experience levels. Additionally, it features multiple outlets, including 120V and 12V options, providing versatility for various power requirements.

Safety is also a priority in the design of the FCG1-6HA. It includes built-in protective features such as an overload protection system, which automatically shuts down the generator in the event of excessive load, preventing damage. The unit also has a fuel shutoff feature to minimize the risk of spillage and leaks, ensuring safer operation.

The efficiency and low emissions of the FCG1-6HA align with modern environmental standards, making it a responsible choice for users conscious of their ecological footprint.

In summary, the Multiquip FCG1-6HA stands out as a powerful, efficient, and portable generator. Its reliable Honda engine, inverter technology, lightweight design, and robust safety features make it an ideal solution for anyone needing dependable power in a variety of settings. Whether for work or leisure, this generator delivers performance without compromise.
Top Page Image Contents