Multiquip FCG1-6HA manual Blades, Diamond Blade

Page 19

BLADES

SPECIFICTOOLSTO BE USED

This saw is to use tools (blades) as follows:

Steel Core Segmented or Continuous Diamond Rim Cutting Wheel.

Any other type of tool is not to be used. See Table 4 for specific blade usage for material.

WARNING

Failure to thoroughly inspect the diamond blade (Figure 11) for operational safety could result in damage to the blade, the saw, and may cause injury to the user or others in the operating area. All damaged blades must be discarded.

34

2

6

1

MAX

 

RPM

Dry/Wet

6,115

Cutting

Model 10PSA

Very Soft Material

7

5

Figure 11. Diamond Blade

Adhere to the Blade Manufacturer's recommendations on handling, storage, and safe usage of blades.

1.

Stress Relief Holes (Gullets) – Check the steel core for

 

cracks that may have propagated from the slots and/or

 

gullets. Cracks indicate extreme fatigue failure and if sawing

 

continues, catastrophic failure will occur.

2.

Edge Of The Steel Core – Check the diameter edge for

 

discoloration (blue oxidation) indicating an overheating

 

condition caused by insufficient cooling water/air.

 

Overheating of blades may lead to loss of core tension

 

and/or increase the possibility for blade failure. Check to

 

make sure the steel core’s width is uniform about the rim of

 

the blade, and not succumbing to an “under cutting”

 

condition brought about by highly abrasive material or

 

improper under cutting core protection.

3. Directional Arrow – Check to ensure that the blade is oriented properly on the blade shaft for sawing. Reference the directional arrow in the blade and place it so the direction

 

of rotation “downcuts” with the turn of the shaft.

4.

Diamond Segment or Rim – Ensure there are no cracks,

 

dings, or missing portions of the diamond segment/rim. DO

 

NOT use a blade that is missing a segment or a portion

 

of the rim. Damaged and/or missing segments/rims may

 

cause damage to your saw, and injury to the user or others

 

in the operating area.

5.

Specifications – Ensure that the blade specifications, size,

 

and diameter properly match up to the sawing operation.

 

Utilizing a diamond blade not matched properly to the task

 

may result in poor performance and/or blade damage.

6.

Arbor Hole – It is essential that the arbor hole diameter

 

properly matches the blade, and that it is free from

 

distortions. Correct blade flanges (collars) must be used.

 

The inside face of the flanges must be clean & free of debris.

 

An out of round arbor condition will cause damage to the

 

blade and the saw.

7. MAX RPM – This RPM reference is the maximum safe operating speed for the blade selected. DO NOT use blades rated at a lower rotational speed than the rated RPM of the saw (6000 RPM). Exceeding the MAX RPM is dangerous, and may cause poor performance and may damage the blade. All blades must be designed to meet or exceed the maximum spindle RPM.

FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model FCG1-6HA Proposition 65 Warning Respiratory Hazards SILICOSIS/RESPIRATORY Warnings Silicosis WarningFCG16HA SlabSaver Concrete Saw Table of ContentsFCG1 Concrete Saw Specifications SpecificationsSideView Front View DimensionsForyour Safety and the Safety of Others Safety Message Alert Symbols8 FCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 Rules for Safe Operation Rules for Safe OperationDiamond Blade Safety General SafetySaw Transportation Safety Maintenance SafetyEmergencies Intended Use General InformationFCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 FCG16HA Concrete Saw ComponentsBeltTension Adjuster Adjusts belt tension Engine Controls and Components Basic EngineBelt Alignment and Tensioning GUARDS, Covers and V-BELTSNational Standards Institute Ansi B7.1 and B7.5 Belt CheckTo Remove and Replace the V-belt To Tighten the V-beltDiamond Blade BladesCutting Depth Blade PlacementDiamond Blades Blade SpeedDiamond Blade Placement Blade Removal and ReplacementRaise/Lower Assembly Cutting Depth AdjustmentBlade Check InspectionBefore Starting Engine Oil CheckOperation Engine Shutdown SwitchThrottle Lever Rotate the throttle lever toward full throttle Stopping the EngineRestarting After Intervention Maintenance Chassis Lubrication Engine tank & strainerFuel line Spark plugBlade Troubleshooting Troubleshooting SAWTroubleshooting Engine Troubleshooting EngineTroubleshooting Engine FCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 Explanation of Code in Remarks Column Sample Parts ListTo 3 Units Suggested Spare PartsDecal Locator Decal LocatorPart Name Guards Assy Part Name QTY Remarks Guides Assy SCREW, HHC 3/8 16 X 3 Full Thrd Undercarriage Assy Part Name QTY Handle & Depth Adjuster Assy Frame Engine & Blade Drive Assy WASHER, Lock 5/16 MED Honda GX200QXC9 AIR Cleaner Cyclone Assy GASKET, Elbow Honda GX200QXC9 Camshaft Assy ROD, Push Honda GX200QXC9 Carburetor Assy Gasket SET Honda GX200QXC9 Control Assy ARM, Governor Honda GX200QXC9 Crankcase Cover Assy GASKET, OIL Filler CAP Honda GX200QXC9 Crankshaft Assy Crankshaft Q- Type Honda GX200QXC9 Cylinder Barrel Assy Switch ASSEMBLY, OIL Level Honda GX200QXC9 Cylinder Head Assy CLIP, Valve Guide Honda GX200QXC9 FAN Cover Assy COVER, FAN *R8* Bright RED Honda GX200QXC9 Flywheel Assy FAN, Cooling Honda GX200QXC9 Fuel Tank Assy RUBBER, Supporter 107MM Honda GX200QXC9 Ignition Coil Assy Coil ASSEMBLY, Ignition Honda GX200QXC9 Muffler Assy Muffler Honda GX200QXC9 Piston Assy Ring SET, Piston Standard Honda GX200QXC9 Recoil Starter Assy R8* Bright RED Honda GX200QXC9 Gasket KIT Assy No Illustration AvailableGASKET, Case Cover Honda GX200QXC9 Labels Assy Emblem Freight Policy Terms and Conditions of Sale PartsFCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 HERE’S HOW to GET Help

FCG1-6HA specifications

The Multiquip FCG1-6HA is an advanced compact generator designed to meet the needs of contractors, event planners, and outdoor enthusiasts. This generator is known for its reliability, efficiency, and user-friendly features that make it an essential tool in various applications.

One of the standout features of the FCG1-6HA is its powerful Honda engine, which delivers robust performance while ensuring fuel efficiency. The engine operates quietly, making it ideal for noise-sensitive environments such as residential areas and outdoor events. With a strong output capacity, the generator provides a stable power supply for multiple devices and tools simultaneously.

The FCG1-6HA is equipped with advanced inverter technology, which produces clean and stable electricity. This feature is particularly important for sensitive electronics like laptops, smartphones, and medical equipment, ensuring they operate safely without the risk of damage from unstable power.

The generator's compact and lightweight design enhances its portability, allowing users to transport it easily to remote job sites or recreational areas. The durable frame construction ensures it can withstand tough conditions, making it an excellent choice for construction sites and outdoor adventures.

Another significant characteristic of the FCG1-6HA is its user-friendly control panel. The intuitive layout with easy-to-read indicators and straightforward controls simplifies operation for users of all experience levels. Additionally, it features multiple outlets, including 120V and 12V options, providing versatility for various power requirements.

Safety is also a priority in the design of the FCG1-6HA. It includes built-in protective features such as an overload protection system, which automatically shuts down the generator in the event of excessive load, preventing damage. The unit also has a fuel shutoff feature to minimize the risk of spillage and leaks, ensuring safer operation.

The efficiency and low emissions of the FCG1-6HA align with modern environmental standards, making it a responsible choice for users conscious of their ecological footprint.

In summary, the Multiquip FCG1-6HA stands out as a powerful, efficient, and portable generator. Its reliable Honda engine, inverter technology, lightweight design, and robust safety features make it an ideal solution for anyone needing dependable power in a variety of settings. Whether for work or leisure, this generator delivers performance without compromise.
Top Page Image Contents