GENERAL INFORMATION
Intended Use
Operate the FCG16HA Saw, tools and components in accordance with the manufacturer's instructions. Use of any other tools for stated operation is considered contrary to designated use. The risk of such use lies entirely with the user. The manufacturer cannot be held liable for damages as a result of misuse.
This saw is not intended for wet cutting. (The use of water sprayed onto the tool [blade] during the cutting operation).
FAMILIARIZATION
This FCG16HA Saw is designed for dry sawing of concrete slabs utilizing diamond blades.The saw has been engineered for general and industrial flat sawing applications that include: Joint Sawing of Green Concrete, Decorative Sawing in Cured Concrete, Light Demolition Sawing and "V" Groove Beveling. The simple and compact nature of the FCG16HA makes it a perfect sawing tool for one person to operate and transport. The saw combines innovative features, top quality components, and a committed attention to
For peak performance, the FCG16HA has been engineered to operate a powerful GX200 Honda Gasoline engine and 10" diameter diamond blades. This special design allows for fast/ clean cuts in different materials at depths from 1/4" to 3 1/4".
The
A robust blade shaft bearing assembly ensures minimal flutter and shaft harmonics providing the most advantageous conditions for a diamond blade at operating speeds.
Retractable front & rear pointers with "tracking wheels" are provided to support precise straight sawing. This system permits the operator to quickly adjust the blade cutting depth and safeguard against
Operator control of the saws is safely accomplished with adjustable handle bars, and a conveniently oriented raise/lower lever and depth adjustment wheel. An
ENGINE
Refer to the engine Owner’s Manual for specific instructions regarding operation, service and maintenance.
PAGE 12 — FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10)