Multiquip FCG1-6HA manual BeltTension Adjuster Adjusts belt tension

Page 15

COMPONENTS

Figures 3 shows the location of the basic controls or components, for the FCG16HA Concrete Saw. Listed below is a brief explanation of each control or component

1.Hand Grips/Handlebar – When operating the saw, place both hands on each grip to maneuver the saw.

2.Adjustable Handle – Set to comfortable operating position.

3.Rear Guide – Rear guide wheel drops into cut to assist in straight tracking.

4.Air Filter – Prevents dirt and debris from entering the engine air intake. Keep cleaned and replace when necessary.

5.Recoil Starter Handle – Pull to engage and start the engine.

6.Recoil Starter Assembly – Engages the engine when the handle is pulled and rewinds the starter rope when the handle is released.

7.Wheels/Carraige Assembly – Heavy-duty polyurethane wheels with permanently sealed ball bearings.

8.Diamond Blade – 0.675" (15.9 mm) Arbor diameter. 10" blade capacity. 10" diameter provides for 1/4" to 3 1/4" depth of cut.MAX Width blade is .375" (9.5 mm).

9.Blade Guard – Covers saw blade and flips up to allow blade to be changed.

10.BeltTension Adjuster – Adjusts belt tension.

11.Front Pointer – Assists in straight tracking.

12.Front Pointer Arm – Pivots up for storage and pivots down for use.

13.Depth Adjust Disk – Turn disk clockwise or counter- clockwise to adjust the cutting depth up or down.

14.FuelTank – Use unleaded gasoline. Do not overfill.

15.Shift Knob – Moves Depth Stop Rod in or out of keyhole slot.

16.V-Belt Cover – Remove this cover to gain access to the V- belt. NEVER operate the saw with this cover removed.

17.Arbor Shaft Grease Zerks – Conveniently located for lubrication.

18.On/Off Switch (Engine)– Turn to the "ON" position to allow engine to be started and turn to the "OFF" position to prevent accidental starting.

19.Handle Lock – Lock handle height to a comfortable operating position.

20.Screw Plunger – Line up bottom edge of Depth Stop Rod on Screw Plunger across from desired depth line mark.

21.Depth Stop Rod – Holds blade above working surface or allows blade to cut into working surface at specified depth.

22.Engine Shut-off Switch – The Engine Shutdown Switch located next to the handle lock serves both as an Emergency Engine Shut-Off and as the primary Shutdown switch. This allows the operator to shutdown the saw safely away from moving parts.

23.Dust Collection – Provides for connection to suitable dust collection bag or vacuum system.

24.Sash – Allows for the lowering and raising of the front guide from the operator's position.

FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model FCG1-6HA Proposition 65 Warning Respiratory Hazards SILICOSIS/RESPIRATORY Warnings Silicosis WarningFCG16HA SlabSaver Concrete Saw Table of ContentsFCG1 Concrete Saw Specifications SpecificationsSideView Front View DimensionsForyour Safety and the Safety of Others Safety Message Alert Symbols8 FCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 Rules for Safe Operation Rules for Safe OperationDiamond Blade Safety General SafetyMaintenance Safety Saw Transportation SafetyEmergencies Intended Use General InformationFCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 FCG16HA Concrete Saw ComponentsBeltTension Adjuster Adjusts belt tension Engine Controls and Components Basic EngineBelt Alignment and Tensioning GUARDS, Covers and V-BELTSNational Standards Institute Ansi B7.1 and B7.5 Belt CheckTo Remove and Replace the V-belt To Tighten the V-beltDiamond Blade BladesCutting Depth Blade PlacementDiamond Blades Blade SpeedDiamond Blade Placement Blade Removal and ReplacementRaise/Lower Assembly Cutting Depth AdjustmentBlade Check InspectionBefore Starting Engine Oil CheckOperation Engine Shutdown SwitchThrottle Lever Rotate the throttle lever toward full throttle Stopping the EngineRestarting After Intervention Maintenance Chassis Lubrication Engine tank & strainerFuel line Spark plugBlade Troubleshooting Troubleshooting SAWTroubleshooting Engine Troubleshooting EngineTroubleshooting Engine FCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 Explanation of Code in Remarks Column Sample Parts ListTo 3 Units Suggested Spare PartsDecal Locator Decal LocatorPart Name Guards Assy Part Name QTY Remarks Guides Assy SCREW, HHC 3/8 16 X 3 Full Thrd Undercarriage Assy Part Name QTY Handle & Depth Adjuster Assy Frame Engine & Blade Drive Assy WASHER, Lock 5/16 MED Honda GX200QXC9 AIR Cleaner Cyclone Assy GASKET, Elbow Honda GX200QXC9 Camshaft Assy ROD, Push Honda GX200QXC9 Carburetor Assy Gasket SET Honda GX200QXC9 Control Assy ARM, Governor Honda GX200QXC9 Crankcase Cover Assy GASKET, OIL Filler CAP Honda GX200QXC9 Crankshaft Assy Crankshaft Q- Type Honda GX200QXC9 Cylinder Barrel Assy Switch ASSEMBLY, OIL Level Honda GX200QXC9 Cylinder Head Assy CLIP, Valve Guide Honda GX200QXC9 FAN Cover Assy COVER, FAN *R8* Bright RED Honda GX200QXC9 Flywheel Assy FAN, Cooling Honda GX200QXC9 Fuel Tank Assy RUBBER, Supporter 107MM Honda GX200QXC9 Ignition Coil Assy Coil ASSEMBLY, Ignition Honda GX200QXC9 Muffler Assy Muffler Honda GX200QXC9 Piston Assy Ring SET, Piston Standard Honda GX200QXC9 Recoil Starter Assy R8* Bright RED Honda GX200QXC9 Gasket KIT Assy No Illustration AvailableGASKET, Case Cover Honda GX200QXC9 Labels Assy Emblem Freight Policy Terms and Conditions of Sale PartsFCG16HA SAW Operation and Parts Manual REV. #1 03/19/10 HERE’S HOW to GET Help

FCG1-6HA specifications

The Multiquip FCG1-6HA is an advanced compact generator designed to meet the needs of contractors, event planners, and outdoor enthusiasts. This generator is known for its reliability, efficiency, and user-friendly features that make it an essential tool in various applications.

One of the standout features of the FCG1-6HA is its powerful Honda engine, which delivers robust performance while ensuring fuel efficiency. The engine operates quietly, making it ideal for noise-sensitive environments such as residential areas and outdoor events. With a strong output capacity, the generator provides a stable power supply for multiple devices and tools simultaneously.

The FCG1-6HA is equipped with advanced inverter technology, which produces clean and stable electricity. This feature is particularly important for sensitive electronics like laptops, smartphones, and medical equipment, ensuring they operate safely without the risk of damage from unstable power.

The generator's compact and lightweight design enhances its portability, allowing users to transport it easily to remote job sites or recreational areas. The durable frame construction ensures it can withstand tough conditions, making it an excellent choice for construction sites and outdoor adventures.

Another significant characteristic of the FCG1-6HA is its user-friendly control panel. The intuitive layout with easy-to-read indicators and straightforward controls simplifies operation for users of all experience levels. Additionally, it features multiple outlets, including 120V and 12V options, providing versatility for various power requirements.

Safety is also a priority in the design of the FCG1-6HA. It includes built-in protective features such as an overload protection system, which automatically shuts down the generator in the event of excessive load, preventing damage. The unit also has a fuel shutoff feature to minimize the risk of spillage and leaks, ensuring safer operation.

The efficiency and low emissions of the FCG1-6HA align with modern environmental standards, making it a responsible choice for users conscious of their ecological footprint.

In summary, the Multiquip FCG1-6HA stands out as a powerful, efficient, and portable generator. Its reliable Honda engine, inverter technology, lightweight design, and robust safety features make it an ideal solution for anyone needing dependable power in a variety of settings. Whether for work or leisure, this generator delivers performance without compromise.
Top Page Image Contents