Hobart HBR300 instruction manual Operating the Scale, Operating in Setup Mode, Presetting Tare

Bench Receiving Scale

Operating the Scale

Refer to the specific section for a further explanation of each step.

To operate the scale:

ON

1. PRESS OFF to turn the scale on.

2.Access Setup Mode to preset tare and set upper and lower limits if desired.

3.Access Operator Mode to operate one-touch tare, weigh products, and weigh items in batches. REFER to page 14.

4.Access Setup Mode to clear or change preset tare or

upper and lower weight limits if desired.

ON

5. PRESS OFF to turn the scale off.

✎

Tip

Upper and lower weight limits remain in memory unless batteries are removed or cord is unplugged.

☛

Note

If at any time an incorrect weight displays, verify that your

desired unit of weight (lb or kg) indicator is lit, PRESS to change the unit of weight.

lb kg

Operating in Setup Mode

Presetting Tare

Access Setup Mode to set, clear, or change preset tare and upper and lower weight limits.

Preset the tare if you know the package weight (tare value).

☛

Note

If you want to preset tare but do not know the tare value, weigh the package or container. The weight displayed is the tare value. Follow the steps below to preset tare.

To preset tare:

	FUNCTION	TARE
1. HOLD DOWN		. The tare indicator
	and PRESS

and last digit on the display flashes.

9